Shopping Cart

Specials

Products

Resources

Picnic Soap, Make it While it's Hot!

*|MC:SUBJECT|*
In this issue: Summery picnic blanket inspired soap. 40% off an elegant mold design and introducing 'Making Milk Soap from Scratch'.
Email doesn't look right?
View it in your browser.

Picnic Soap

With summer off to a glorious start, we are thinking of days spent outside even while we are in the Soap Lab. This cute little bar is reminiscent of a picnic blanket (ants are optional). Scented with our Grass Stain fragrance and colored with Non-Bleeding Cherry and Liquid Green Oxide, we've captured the essence of summer in one little bar of soap!
Molds and Tools:

  

Get all of the ingredients for this project with the click of a button!

ONE: Melt 10 ounces of Clear Melt & Pour on 30 second bursts in the microwave, stirring between bursts. Once the soap is fully melted, split in two 5 ounce batches.

TWO: Color each batch, one with 3 drops Non-Bleeding Cherry, one with 2 drops Liquid Green Oxide and two drops Citrus Green LabColor. Mix color in well and once the soap has cooled to 130 degrees, pour each batch into a Brownie Tray Mold and spray with Isopropyl Alcohol to pop any bubbles. Allow to fully harden. If using just one tray allow to set-up, peel the soap out and re-melt and pour the other color. 

THREE: While the green and cherry soaps are hardening, melt 6 ounces of White Melt & Pour on 30 second bursts in the microwave, stirring between bursts. When fully melted, add 3 mL of Grass Stain fragrance oil and mix well. When the soap cools to 130 degrees, pour one ounce of White Melt & Pour into each cavity (you will use 6) of your Square Silicone Mold and spray with Isopropyl Alcohol to pop any bubbles. Allow to fully harden.

FOUR: While the white soap is hardening, unmold and cut the cherry-colored soap into strips, varying in width but no wider than 1/4” each. If you’d prefer a more uniform look, measure each strip exactly, otherwise this step is totally fine to eyeball. Once all of the strips are cut, cut each strip into 2 1/4” lengths (you should be able to get 3 lengths per strip). Unmold and cut the green colored soap and cut into strips that are 3/4” wide each. Cut opposite angles, on one side of the green soap strip, at random intervals to mimic the look of grass.

FIVE: Once the White Soap has fully hardened, arrange green grass strips along the four walls of the square cavities with the pointy sides up. For the best fit, cut each of the strips as you go. Once all of the grass strips are arranged in the cavities, melt 16 ounces of Clear  Melt & Pour base. When fully melted, add 10 mL of Grass Stain fragrance oil and mix well.

SIX: When the clear soap is 125 F or less, liberally spray the space between the grass with Isopropyl Alcohol and fill about 1/2 way with clear soap to secure the strips (you’ll have some clear soap left over). Spray again with Isopropyl Alcohol to pop any bubbles. Allow the clear soap to fully harden.

SEVEN: Liberally spray 36 cherry strips with Isopropyl alcohol. Arrange six strips horizontally in each cavity, and pour a thin layer of clear soap over them (you may have to reheat it a bit but be sure it is just 125 F or less). Spray with Isopropyl Alcohol to pop any bubbles and allow to harden. Once the clear soap has hardened, liberally spray another 36 cherry strips with Isopropyl Alcohol and arrange six strips vertically in each cavity. Pour the remaining clear soap over the strips and spray with Isopropyl Alcohol to pop any bubbles.

optional: After you’ve poured the final layer of clear soap, stick novelty plastic ants that have been sprayed with Isopropyl Alcohol into the top. It’s okay if they don’t sink into the soap all the way; it adds interest if they don’t! Spray entire soap surface with Isopropyl Alcohol to pop any bubbles.

EIGHT: Once the soaps have fully hardened, unmold and wrap as soon as possible to avoid glycerin dew.

 

40% Off!

This unique mold design lends itself to any color combination and fragrance. We think the Moroccan Tile Mold is such a great design that's too often overlooked, so we are offering this incredible deal!

Use coupon code TILE40 and get 40% off the Moroccan Tile Soap Mold.
Coupon expires June 30th, 2012. Cannot be combined with other discounts.

What's New?

'Making Milk Soap from Scratch', the new book by Anne-Marie Faiola. Learn 4 separate techniques for incorporating milk into your soap. Find out how to avoid that smelly orange soap problem and more. Includes many recipes and instructions for using all kinds of milk.

Find more new products here.
Copyright © 2012 Bramble Berry Inc, All rights reserved.
Our mailing address is:
2138 Humboldt Street, Bellingham WA 98225
Contact us:
info@brambleberry.com
1-877-627-7883