Black Oxide: "Midnight", black is a great color to have in any collection -- creates an impressive and classic contrast against white. While this is a non-bleeding colorant, if you add too much to your soap it can migrate into other colors in the soap design or stain washcloths. We recommend starting out at 1/16th to 1/8th teaspoon per pound for melt & pour soaps. For cold process, add 1 teaspoon of oxide to 1 tablespoon of a carrier oil like Sweet Almond or Olive Oil and mix well using a mini mixer. To create the color in the sample of cold process soap above, we used 1/4th teaspoon of colorant (about 0.15 oz before dispersing) in 1 pound of soap. For more information on oxides in soap, check out this blog post.
Ingredients: Botanical Name: Iron Oxide (CI 77489)Common Name: Iron Oxide
I made some gorgeous bars of melt and pour soap last night using white and this black pigment. The bars turned out beautiful with the tops being lumpy as I wanted them to be and the black scattered throughout the soap - the bottom of the soap is solid black. GROAN! The black on the bottom of the soap rubs off on my hands - it's almost like rubbing a magic marker on my hand. It's only been "cured" for 24 hours now - but will it stop rubbing off? Is there anything with which I can treat it to stop it from rubbing off? The soap is just too beautiful to scrap and I hope there is a way to fix this! HELP!
Reply from Bramble Berry Hi Sara! I'm so glad your soap turned out so beautiful using this Black Oxide Pigment! Though, I'm sorry i's rubbing off onto your hands so much. In our tests and recipes we found 1/16-1/8 tsp per pound of melt and pour soap colored the soap perfectly without washing off onto our skin or washcloths. When a soap is colored in high concentration the colorant can definitely run off the soap! You can always melt down your soap and add more uncolored base to keep this from happening. I will email you personally to help troubleshoot!
I haven't tried this yet, but can this or the liquid black oxide pigment make a true black lotion? or any other pigments that will make a bright colorful lotion that is not pastel?
Reply from Bramble Berry Hi Denny! Even this Black Oxide Pigment would not be able to get you a true black lotion. Because of the emulsification in lotion it is naturally white so any color you use would be mixing with white, lightening the color. Also, micas and pigments tend to settle to the bottom of lotions over time unless they are super thick. For this reason we usually recommend LabColors to color your lotion, as shown in the Argan & Shea Lotion tutorial. I will email you personally to discuss this further!
I used the amount recommended with my 2 lb mold and at first I didn't think it would be enough (I looked grayish) and even after I cut it, it seem lighter then what I hoped for. Now a week afterward it actually looks black again. I made a black and white (licorice scented) soap so I'm sure happy it looks black again. I did use my sample bar and washed my hands with it. Noticed the bubbles were a little grey but it did not stain my cloth at all. Would buy again!
This colorant works well in CP soap. I haven't noticed problems with the bubbles turning gray. It doesn't fade, and it's easy to use.
We’re a friendly group who love social media. See you ‘round the web!