Baby Breath Soap Project

Images

CLOSE

Product Actions

Skill Level: Intermediate
Time: 1 hour
Yield: About 3.5 pounds of soap

Project Description

This soap has a simple and elegant design. It's scented with Baby's Breath Fragrance Oil.

Baby’s breath flowers are a delicate addition to any bouquet. They usually play second fiddle to larger flowers, but for this soap we let baby’s breath take center stage. We kept the design extremely simple – the entire batch is colored white and dried baby’s breath flowers are placed on top.

To get the bright white shade, we used only light-colored oils. We also added plenty of titanium dioxide, which does pose a few obstacles. Using a large amount of titanium dioxide can lead to glycerin rivers. They can be prevented by using a water discount, so this recipe is discounted by 15%.

Titanium dioxide is similar to clay in soap – it tends to dry it out. We found the combination of titanium dioxide, heat, and a water discount led to cracking. After tweaking the recipe a few times, we found an amount of titanium dioxide that led to extremely white bars without cracking. The key was soaping with slightly cooler temperatures (100-110 ° F) and placing the soap in the freezer for 24 hours.

The soap is made with Baby's Breath Fragrance Oil, which is a soft and delicate scent that doesn’t discolor. The baby’s breath flowers used on top were purchased fresh and allowed to dry for several weeks. We picked off the flowers to sprinkle on top prior to soaping. Interestingly, we found that the flowers bled a yellow hue onto the soap.

Additional Information

  • Supplies
  • Instructions
  • Reviews
  • Q&A

Supplies

9 Ingredients
1 Tools
For All 10 Items
If an item is out of stock, it will not be added to your cart.
All 10 Items :
Canola Oil, High Oleic - 1 lb
Canola Oil, High Oleic - 1 lb Item#: IB002470
$5.99

$5.99
Coconut Oil - 1 lb
Coconut Oil - 1 lb Item#: IB002326
$5.99

$5.99
Sweet Almond Oil - 1 lb
Sweet Almond Oil - 1 lb Item#: IB002355
$8.99

$8.99
Castor Oil - 1 lb
Castor Oil - 1 lb Item#: IB002323
$6.99

$6.99
Shea Oil, Liquid - 4 oz
Shea Oil, Liquid - 4 oz Item#: IB002438
$4.99

$9.98
Sodium Hydroxide Lye
Sodium Hydroxide Lye Item#: IB002149
$14.99

$14.99
Baby's Breath Fragrance Oil - 4 oz
Baby's Breath Fragrance Oil - 4 oz Item#: IB000910
$13.42

$13.42
Titanium Dioxide Pigment - 1 oz
Titanium Dioxide Pigment - 1 oz Item#: IB002531
$2.99

$2.99
Palm Oil - 1 lb
Palm Oil - 1 lb Item#: IB002379
$6.39

$6.39
Side of a Tall 12 inch Silicone Loaf Mold for Soap Making
Tall 12 Silicone Loaf Mold Item#: IB002870
$26.99
Get 5 or More and Save 10%!

$26.99

Instructions

Baby Breath Soap Project

  • Skill Level: Intermediate
  • Time: 1 hour
  • Yield: About 3.5 pounds of soap

Baby’s breath flowers are a delicate addition to any bouquet. They usually play second fiddle to larger flowers, but for this soap we let baby’s breath take center stage. We kept the design extremely simple – the entire batch is colored white and dried baby’s breath flowers are placed on top.

To get the bright white shade, we used only light-colored oils. We also added plenty of titanium dioxide, which does pose a few obstacles. Using a large amount of titanium dioxide can lead to glycerin rivers. They can be prevented by using a water discount, so this recipe is discounted by 15%.

Titanium dioxide is similar to clay in soap – it tends to dry it out. We found the combination of titanium dioxide, heat, and a water discount led to cracking. After tweaking the recipe a few times, we found an amount of titanium dioxide that led to extremely white bars without cracking. The key was soaping with slightly cooler temperatures (100-110 ° F) and placing the soap in the freezer for 24 hours.

The soap is made with Baby's Breath Fragrance Oil, which is a soft and delicate scent that doesn’t discolor. The baby’s breath flowers used on top were purchased fresh and allowed to dry for several weeks. We picked off the flowers to sprinkle on top prior to soaping. Interestingly, we found that the flowers bled a yellow hue onto the soap.

You will need:

  • Tall 12" Silicone Loaf Mold
  • 6.8 oz. Canola Oil (17%)
  • 1.2 oz. Castor Oil (3%)
  • 10 oz. Coconut Oil (25%)
  • 8 oz. Palm Oil (20%)
  • 6 oz. Shea Oil (15%)
  • 8 oz. Sweet Almond Oil (20%)
  • 5.6 oz. Sodium Hydroxide Lye
  • 11.2 oz. Distilled Water (15% water discount)
  • 2.5 oz. Baby’s Breath Fragrance Oil
  • 2 tsp. Titanium Dioxide
  • Dried Baby’s Breath Flowers

FRAGRANCE PREP: Measure 2.5 ounces of Baby’s Breath Fragrance Oil into a small glass container and set aside.

SAFETY FIRST: Suit up for safe handling practices. That means goggles, gloves, and long sleeves. Make sure kids, pets, other distractions, and tripping hazards are out of the house or don’t have access to your soaping space. Always soap in a well-ventilated area.

Follow these steps:

1

Slowly and carefully add 5.6 ounces of lye to 11.2 ounces of water and gently stir until the lye has fully dissolved and the liquid is clear. Set aside to cool. If you’d like a harder bar of soap that releases faster from the mold, you can add sodium lactate to the cooled lye water. Use 1 teaspoon of sodium lactate per pound of oils in the recipe. For this recipe, you’d add 2.5 teaspoons sodium lactate.

2

In a large glass bowl, combine and melt the 10 ounces of coconut oil, 6.8 ounces of canola oil, 1.2 ounces of castor oil, 6 ounces of shea oil, 8 ounces of sweet almond oil, and 8 ounces of palm oil (remember to fully melt then mix your entire container of palm oil before portioning).

3

Add 2 teaspoons of titanium dioxide to the oils and use a stick blender to fully combine until there are no chunks.

4

Once the lye water and the oils have cooled to about 100-110 degrees F, add the lye water to the oils and stick blend until a thin trace.

5

Add the 2.5 ounces of Baby’s Breath Fragrance Oil, and use the stick blender to mix in. Continue blending until you reach a medium trace.

6

Pour all of the soap batter into the mold. Firmly tap it on the counter to help get rid of bubbles. Use a spoon to manipulate the top and add a very light texture.

7

Sprinkle dried baby’s breath flowers on top of the soap, concentrating them toward the center. Use a little more than you’d like, as some may fall off during the cutting process. Use gloved fingers to gently press the flowers into the soap to help them stick better.

8

Spritz the top of the soap with 99% isopropyl alcohol to help prevent soda ash. To prevent cracking and glycerin rivers, place the soap in the freezer for 24 hours. Allow the soap to fully thaw and harden for another 2-3 days.

To avoid drag marks, lay the soap on its side and cut. Allow the bars to harden and cure for 4-6 weeks. Enjoy.

Tutorial credits

Photographer: Amanda Kerzman

Baby Breath Soap Project

  • Skill Level: Intermediate
  • Time: 1 hour
  • Yield: About 3.5 pounds of soap

Baby’s breath flowers are a delicate addition to any bouquet. They usually play second fiddle to larger flowers, but for this soap we let baby’s breath take center stage. We kept the design extremely simple – the entire batch is colored white and dried baby’s breath flowers are placed on top.

To get the bright white shade, we used only light-colored oils. We also added plenty of titanium dioxide, which does pose a few obstacles. Using a large amount of titanium dioxide can lead to glycerin rivers. They can be prevented by using a water discount, so this recipe is discounted by 15%.

Titanium dioxide is similar to clay in soap – it tends to dry it out. We found the combination of titanium dioxide, heat, and a water discount led to cracking. After tweaking the recipe a few times, we found an amount of titanium dioxide that led to extremely white bars without cracking. The key was soaping with slightly cooler temperatures (100-110 ° F) and placing the soap in the freezer for 24 hours.

The soap is made with Baby's Breath Fragrance Oil, which is a soft and delicate scent that doesn’t discolor. The baby’s breath flowers used on top were purchased fresh and allowed to dry for several weeks. We picked off the flowers to sprinkle on top prior to soaping. Interestingly, we found that the flowers bled a yellow hue onto the soap.

You will need:

  • Tall 12" Silicone Loaf Mold
  • 6.8 oz. Canola Oil (17%)
  • 1.2 oz. Castor Oil (3%)
  • 10 oz. Coconut Oil (25%)
  • 8 oz. Palm Oil (20%)
  • 6 oz. Shea Oil (15%)
  • 8 oz. Sweet Almond Oil (20%)
  • 5.6 oz. Sodium Hydroxide Lye
  • 11.2 oz. Distilled Water (15% water discount)
  • 2.5 oz. Baby’s Breath Fragrance Oil
  • 2 tsp. Titanium Dioxide
  • Dried Baby’s Breath Flowers

FRAGRANCE PREP: Measure 2.5 ounces of Baby’s Breath Fragrance Oil into a small glass container and set aside.

SAFETY FIRST: Suit up for safe handling practices. That means goggles, gloves, and long sleeves. Make sure kids, pets, other distractions, and tripping hazards are out of the house or don’t have access to your soaping space. Always soap in a well-ventilated area.

Follow these steps:

1

Slowly and carefully add 5.6 ounces of lye to 11.2 ounces of water and gently stir until the lye has fully dissolved and the liquid is clear. Set aside to cool. If you’d like a harder bar of soap that releases faster from the mold, you can add sodium lactate to the cooled lye water. Use 1 teaspoon of sodium lactate per pound of oils in the recipe. For this recipe, you’d add 2.5 teaspoons sodium lactate.

2

In a large glass bowl, combine and melt the 10 ounces of coconut oil, 6.8 ounces of canola oil, 1.2 ounces of castor oil, 6 ounces of shea oil, 8 ounces of sweet almond oil, and 8 ounces of palm oil (remember to fully melt then mix your entire container of palm oil before portioning).

3

Add 2 teaspoons of titanium dioxide to the oils and use a stick blender to fully combine until there are no chunks.

4

Once the lye water and the oils have cooled to about 100-110 degrees F, add the lye water to the oils and stick blend until a thin trace.

5

Add the 2.5 ounces of Baby’s Breath Fragrance Oil, and use the stick blender to mix in. Continue blending until you reach a medium trace.

6

Pour all of the soap batter into the mold. Firmly tap it on the counter to help get rid of bubbles. Use a spoon to manipulate the top and add a very light texture.

7

Sprinkle dried baby’s breath flowers on top of the soap, concentrating them toward the center. Use a little more than you’d like, as some may fall off during the cutting process. Use gloved fingers to gently press the flowers into the soap to help them stick better.

8

Spritz the top of the soap with 99% isopropyl alcohol to help prevent soda ash. To prevent cracking and glycerin rivers, place the soap in the freezer for 24 hours. Allow the soap to fully thaw and harden for another 2-3 days.

To avoid drag marks, lay the soap on its side and cut. Allow the bars to harden and cure for 4-6 weeks. Enjoy.

Tutorial credits

Photographer: Amanda Kerzman

You will need:

  • Tall 12" Silicone Loaf Mold
  • 6.8 oz. Canola Oil (17%)
  • 1.2 oz. Castor Oil (3%)
  • 10 oz. Coconut Oil (25%)
  • 8 oz. Palm Oil (20%)
  • 6 oz. Shea Oil (15%)
  • 8 oz. Sweet Almond Oil (20%)
  • 5.6 oz. Sodium Hydroxide Lye
  • 11.2 oz. Distilled Water (15% water discount)
  • 2.5 oz. Baby’s Breath Fragrance Oil
  • 2 tsp. Titanium Dioxide
  • Dried Baby’s Breath Flowers

FRAGRANCE PREP: Measure 2.5 ounces of Baby’s Breath Fragrance Oil into a small glass container and set aside.

SAFETY FIRST: Suit up for safe handling practices. That means goggles, gloves, and long sleeves. Make sure kids, pets, other distractions, and tripping hazards are out of the house or don’t have access to your soaping space. Always soap in a well-ventilated area.

Follow these steps:

1

Slowly and carefully add 5.6 ounces of lye to 11.2 ounces of water and gently stir until the lye has fully dissolved and the liquid is clear. Set aside to cool. If you’d like a harder bar of soap that releases faster from the mold, you can add sodium lactate to the cooled lye water. Use 1 teaspoon of sodium lactate per pound of oils in the recipe. For this recipe, you’d add 2.5 teaspoons sodium lactate.

2

In a large glass bowl, combine and melt the 10 ounces of coconut oil, 6.8 ounces of canola oil, 1.2 ounces of castor oil, 6 ounces of shea oil, 8 ounces of sweet almond oil, and 8 ounces of palm oil (remember to fully melt then mix your entire container of palm oil before portioning).

3

Add 2 teaspoons of titanium dioxide to the oils and use a stick blender to fully combine until there are no chunks.

4

Once the lye water and the oils have cooled to about 100-110 degrees F, add the lye water to the oils and stick blend until a thin trace.

5

Add the 2.5 ounces of Baby’s Breath Fragrance Oil, and use the stick blender to mix in. Continue blending until you reach a medium trace.

6

Pour all of the soap batter into the mold. Firmly tap it on the counter to help get rid of bubbles. Use a spoon to manipulate the top and add a very light texture.

7

Sprinkle dried baby’s breath flowers on top of the soap, concentrating them toward the center. Use a little more than you’d like, as some may fall off during the cutting process. Use gloved fingers to gently press the flowers into the soap to help them stick better.

8

Spritz the top of the soap with 99% isopropyl alcohol to help prevent soda ash. To prevent cracking and glycerin rivers, place the soap in the freezer for 24 hours. Allow the soap to fully thaw and harden for another 2-3 days.

To avoid drag marks, lay the soap on its side and cut. Allow the bars to harden and cure for 4-6 weeks. Enjoy.

Tutorial credits

Photographer: Amanda Kerzman

Reviews

Q&A

SHARE YOUR EXPERIENCE

Let us know how it went by leaving a review, asking a question, or uploading your project photos.