Chop 16 ounces of Clear Melt and Pour Soap into small pieces, place it in a heat-safe container, and melt in the microwave using 30-60 second bursts. Add all of the dispersed Aqua Pearl Mica and 0.2 ounces of the Kentish Rain Fragrance Oil. Stir to fully combine.

Spritz the mold with 99% isopropyl alcohol to help the soap spread smoothly. To keep the layers as exact as possible, place the mold on a scale and press the tare button. Pour 8 ounces of the blue soap into the mold and spritz with 99% isopropyl alcohol to get rid of bubbles.

After about 5-10 minutes, test the bottom layer to see if it’s firm enough to support a layer on top. If so, chop 16 ounces of White Melt and Pour Soap Base and melt using 30-60 second bursts. Add 0.2 ounces of Amazon Lily and Rain Fragrance Oil and stir to fully incorporate.

Check the temperature of the white soap. If it’s poured into the mold while extremely hot, it may melt the layer below. If it’s below 130° F, spritz the blue layer with 99% isopropyl alcohol and pour 5.3 ounces of the white soap into the mold. Spritz the top with 99% alcohol to help get rid of bubbles. Allow the layer to harden and cool for about 5-10 minutes.

Chop 16 ounces of Clear Melt and Pour Soap and melt in the microwave using 30-60 second bursts. Add all of the dispersed Kermit Green Mica and 0.2 ounces of the Amazon Lily and Rain Fragrance Oil. Stir to fully combine.

Test the white layer to make sure it’s firm enough to support the green layer. Test the temperature of the green soap. If it's below 130° F, spritz the white soap with 99% isopropyl alcohol and pour 8 ounces of the green soap into the mold. Spritz the top with 99% isopropyl alcohol to get rid of bubbles. Allow to cool and harden for about 5-10 minutes.

Once the green layer has hardened, reheat the white container of soap in the microwave using 15 second bursts. Once the green layer is firm and the white soap is below 130° F, spritz the bottom layer with 99% isopropyl alcohol and pour 5.3 ounces of white soap into the mold. Spritz the top with 99% isopropyl alcohol to get rid of bubbles. Allow to cool and harden for about 5-10 minutes.

Reheat the container of the blue soap in the microwave using 15 second bursts. Once the white layer is firm and the blue soap is below 130° F, spritz the bottom layer with 99% isopropyl alcohol and pour the remaining 8 ounces of blue soap into the mold. Spritz the top with 99% isopropyl alcohol to get rid of bubbles. Allow to cool and harden for about 5-10 minutes.

Reheat the remaining white soap in the microwave using 10-15 second bursts. Once the blue layer is firm and the white soap is below 130° F, spritz the blue layer with 99% isopropyl alcohol and pour the remaining white soap into the mold. Spritz the top with 99% isopropyl alcohol to get rid of bubbles.

Reheat the green container of soap in the microwave using 15 second bursts. Once the white layer is firm and the green soap is below 130° F, spritz the bottom layer with 99% isopropyl alcohol and pour the remaining 8 ounces of green soap into the mold. Spritz the top with 99% isopropyl alcohol to get rid of bubbles.

Allow the soap to fully cool and harden for at least 4-5 hours or up to overnight. Once it’s ready, pull away the sides of the mold to break the airlock. Push out the soap from the bottom. Cut the soap into bars and enjoy! Wrap the soap in plastic wrap after unmolding to prevent glycerin dew. Enjoy!