Eucalyptus Shower Steamer Project

Images

CLOSE

Product Actions

Skill Level: Beginner
Time: 30 minutes
Yield: About 6 shower steamers

Project Description

You don’t need a bathtub to enjoy a fizzy addition to your morning routine! Shower steamers release fragrance in the air while you wash.

For this recipe, we went with eucalyptus essential oil and a touch of lavender 40/42 essential oil. The soft lavender notes round out the strong eucalyptus notes to create a blend that's both invigorating and calming. Find all our natural essential oils here.

To use the steamer, place it on the shower floor or shelf. It should be in a place where it will come in contact with water, but not directly in the shower stream. This, plus a touch of kaolin clay, will help it fizz more slowly.

Want more bath bomb making supplies? Buy these DIY bath bomb kits.

Additional Information

  • Supplies
  • Instructions
  • Reviews
  • Q&A

Supplies

6 Ingredients
1 Tools
For All 7 Items
If an item is out of stock, it will not be added to your cart.
All 7 Items :
Eucalyptus Essential Oil - 1.75 oz
Eucalyptus Essential Oil - 1.75 oz Item#: IB000100
$6.99

$6.99
Lavender 40/42 Essential Oil - 1.75 oz
Lavender 40/42 Essential Oil - 1.75 oz Item#: IB000265
$11.99

$11.99
Witch Hazel - 1 lb
Witch Hazel - 1 lb Item#: IB003098
$6.99

$6.99
Sodium Bicarbonate - 1 lb
Sodium Bicarbonate - 1 lb Item#: IB002935
$2.99

$2.99
Citric Acid - 1 lb
Citric Acid - 1 lb Item#: IB000052
$6.99

$6.99
Kaolin Clay - 1 oz
Kaolin Clay - 1 oz Item#: IB002570
$1.99

$1.99
Disk Mold and Package, Plastic - 10 molds
Disk Mold and Package, Plastic - 10 molds Item#: IB000060
$8.49

$8.49

Instructions

Eucalyptus Shower Steamer Project

  • Skill Level: Beginner
  • Time: 30 minutes
  • Yield: About 6 shower steamers

For this recipe, we went with eucalyptus essential oil and a touch of lavender 40/42 essential oil. The soft lavender notes round out the strong eucalyptus notes to create a blend that's both invigorating and calming. Find all our natural essential oils here.

To use the steamer, place it on the shower floor or shelf. It should be in a place where it will come in contact with water, but not directly in the shower stream. This, plus a touch of kaolin clay, will help it fizz more slowly.

Want more bath bomb making supplies? Buy these DIY bath bomb kits.

You will need:

  • 6 Disk Molds
  • 16 oz. Sodium Bicarbonate (Baking Soda)
  • 8 oz. Citric Acid
  • 0.5 oz. Kaolin Clay
  • 10 mL Eucalyptus Essential Oil
  • 6 mL Lavender 40/42 Essential Oil
  • Witch Hazel in a Spray Bottle
  • Dropper

Follow these steps:

1

In a large bowl, combine 16 ounces of baking soda, 8 ounces of citric acid, and 0.5 ounces of kaolin clay. To get rid of clumps in the mixture, you can push the powders through a sifter or break them up with your fingers. Citric acid has a tendency to take off nail polish, so wear gloves to protect your manicure. Thoroughly stir everything together.

2

Add 10 mL of eucalyptus essential oil and 6 mL of lavender 40/42 essential oil. Use your hands to fully incorporate them into the powder.

3

Test the consistency of the mixture. It should feel like wet sand and hold its shape when squeezed. If it’s too dry, use one hand to spritz the mixture with witch hazel and one to mix. Continue spritzing until the mixture holds its shape.

4

 Firmly press the mixture into the Disk Molds. Allow the steamers to dry for several hours or up to overnight. Remove and enjoy.

Tutorial credits

Photographer: Amanda Kerzman

Eucalyptus Shower Steamer Project

  • Skill Level: Beginner
  • Time: 30 minutes
  • Yield: About 6 shower steamers

For this recipe, we went with eucalyptus essential oil and a touch of lavender 40/42 essential oil. The soft lavender notes round out the strong eucalyptus notes to create a blend that's both invigorating and calming. Find all our natural essential oils here.

To use the steamer, place it on the shower floor or shelf. It should be in a place where it will come in contact with water, but not directly in the shower stream. This, plus a touch of kaolin clay, will help it fizz more slowly.

Want more bath bomb making supplies? Buy these DIY bath bomb kits.

You will need:

  • 6 Disk Molds
  • 16 oz. Sodium Bicarbonate (Baking Soda)
  • 8 oz. Citric Acid
  • 0.5 oz. Kaolin Clay
  • 10 mL Eucalyptus Essential Oil
  • 6 mL Lavender 40/42 Essential Oil
  • Witch Hazel in a Spray Bottle
  • Dropper

Follow these steps:

1

In a large bowl, combine 16 ounces of baking soda, 8 ounces of citric acid, and 0.5 ounces of kaolin clay. To get rid of clumps in the mixture, you can push the powders through a sifter or break them up with your fingers. Citric acid has a tendency to take off nail polish, so wear gloves to protect your manicure. Thoroughly stir everything together.

2

Add 10 mL of eucalyptus essential oil and 6 mL of lavender 40/42 essential oil. Use your hands to fully incorporate them into the powder.

3

Test the consistency of the mixture. It should feel like wet sand and hold its shape when squeezed. If it’s too dry, use one hand to spritz the mixture with witch hazel and one to mix. Continue spritzing until the mixture holds its shape.

4

 Firmly press the mixture into the Disk Molds. Allow the steamers to dry for several hours or up to overnight. Remove and enjoy.

Tutorial credits

Photographer: Amanda Kerzman

You will need:

  • 6 Disk Molds
  • 16 oz. Sodium Bicarbonate (Baking Soda)
  • 8 oz. Citric Acid
  • 0.5 oz. Kaolin Clay
  • 10 mL Eucalyptus Essential Oil
  • 6 mL Lavender 40/42 Essential Oil
  • Witch Hazel in a Spray Bottle
  • Dropper

Follow these steps:

1

In a large bowl, combine 16 ounces of baking soda, 8 ounces of citric acid, and 0.5 ounces of kaolin clay. To get rid of clumps in the mixture, you can push the powders through a sifter or break them up with your fingers. Citric acid has a tendency to take off nail polish, so wear gloves to protect your manicure. Thoroughly stir everything together.

2

Add 10 mL of eucalyptus essential oil and 6 mL of lavender 40/42 essential oil. Use your hands to fully incorporate them into the powder.

3

Test the consistency of the mixture. It should feel like wet sand and hold its shape when squeezed. If it’s too dry, use one hand to spritz the mixture with witch hazel and one to mix. Continue spritzing until the mixture holds its shape.

4

 Firmly press the mixture into the Disk Molds. Allow the steamers to dry for several hours or up to overnight. Remove and enjoy.

Tutorial credits

Photographer: Amanda Kerzman

Reviews

Q&A

SHARE YOUR EXPERIENCE

Let us know how it went by leaving a review, asking a question, or uploading your project photos.