Gold Glimmer Bath Bomb Project
- Skill Level: Intermediate
- Time: 2 hours
- Yield: About 13 bath bombs
Project Description
These bath bombs are all about sparkle, shimmer, and glimmer! King's Gold Mica is added to the mixture, then it's rolled in Snowflake Sparkle Mica. Finally, more mica is drizzled on top. They are scented with Rose Quartz Fragrance Oil, which has notes of orange, jasmine, and sandalwood.
A touch of champagne extract is added to help the bath bombs hold their shape when molding, and to add moisture to the bath water. Any oil-based extract will work great, or you can use a lightweight liquid oil. Polysorbate 80 helps the oil and mica disperse in the bath water.
Looking for more DIY bath bomb supplies? Check out these bath bomb kits.
You will need:
- About 13 Bath Bomb Molds
- 32 oz. Baking Soda (Sodium Bicarbonate)
- 16 oz. Citric Acid
- 1 oz. Champagne Extract
- 0.5 oz. Polysorbate 80
- 9 mL Rose Quartz Fragrance Oil
- King's Gold Mica
- Snowflake Sparkle Mica
- Witch Hazel in a Spray Bottle
- 99% Isopropyl Alcohol
- Dropper
Follow these steps:
1
In a large bowl, mix together 32 ounces of baking soda and 16 ounces of citric acid. To get rid of clumps in the mixture, you can push the powders through a sifter or break them up with your fingers. Add 1 teaspoon of King's Gold Mica and stir. Note: Citric acid has a tendency to take off nail polish, so wear gloves to protect your manicure.
2
In a small container, add 1 ounce of champagne extract, 0.5 ounces of polysorbate and 9 mL of Rose Quartz Fragrance Oil. Stir together.
3
Add the liquids to the baking soda and citric acid. Use your hands to thoroughly mix all the ingredients together until there are no clumps.
4
Test the consistency of the bath bomb mixture. It should feel like wet sand and hold its shape when squeezed. This means it will hold its shape in the mold as well. If it’s too dry, use one hand to spritz the mixture with witch hazel and one to mix.
5
Fill the two halves of the mold, gently pressing the bath bomb mixture in each so they hold their shape. Mound a little extra powder in the center of each half of the mold. Wipe away any powder from the seams of the mold, match the eyelets of each side up, and press together. To avoid any imperfections on your bath bomb, make sure to direct pressure to the edges of the mold rather than the center. Continue filling up the bath bomb molds until the mixture is gone.
6
Allow the bath bombs to harden in the mold for 24 hours. Then, carefully remove them from the package.
7
Fill a bowl with a few tablespoons of Snowflake Sparkle Mica. The following steps can get a little messy, so you may want to lay down newspaper on your surface. Gently roll the bath bomb in the mica until completely covered. Use your fingers to spread it evenly and brush off any extra.
8
In separate containers, mix 1 teaspoon of King's Gold Mica and 1 teaspoon of Snowflake Sparkle Mica with 1 tablespoon of 99% isopropyl alcohol. Use a dropper to drizzle the mica on top of the bath bombs. Continue until you're happy with the look. Let the bath bombs dry for about 30 minutes. Then, place them back into the packaging. To use, place the bath bomb into a hot bath and enjoy!
Tutorial credits
Photographer: Amanda Kerzman
Gold Glimmer Bath Bomb Project
- Skill Level: Intermediate
- Time: 2 hours
- Yield: About 13 bath bombs
Project Description
These bath bombs are all about sparkle, shimmer, and glimmer! King's Gold Mica is added to the mixture, then it's rolled in Snowflake Sparkle Mica. Finally, more mica is drizzled on top. They are scented with Rose Quartz Fragrance Oil, which has notes of orange, jasmine, and sandalwood.
A touch of champagne extract is added to help the bath bombs hold their shape when molding, and to add moisture to the bath water. Any oil-based extract will work great, or you can use a lightweight liquid oil. Polysorbate 80 helps the oil and mica disperse in the bath water.
Looking for more DIY bath bomb supplies? Check out these bath bomb kits.
You will need:
- About 13 Bath Bomb Molds
- 32 oz. Baking Soda (Sodium Bicarbonate)
- 16 oz. Citric Acid
- 1 oz. Champagne Extract
- 0.5 oz. Polysorbate 80
- 9 mL Rose Quartz Fragrance Oil
- King's Gold Mica
- Snowflake Sparkle Mica
- Witch Hazel in a Spray Bottle
- 99% Isopropyl Alcohol
- Dropper
Follow these steps:
1
In a large bowl, mix together 32 ounces of baking soda and 16 ounces of citric acid. To get rid of clumps in the mixture, you can push the powders through a sifter or break them up with your fingers. Add 1 teaspoon of King's Gold Mica and stir. Note: Citric acid has a tendency to take off nail polish, so wear gloves to protect your manicure.
2
In a small container, add 1 ounce of champagne extract, 0.5 ounces of polysorbate and 9 mL of Rose Quartz Fragrance Oil. Stir together.
3
Add the liquids to the baking soda and citric acid. Use your hands to thoroughly mix all the ingredients together until there are no clumps.
4
Test the consistency of the bath bomb mixture. It should feel like wet sand and hold its shape when squeezed. This means it will hold its shape in the mold as well. If it’s too dry, use one hand to spritz the mixture with witch hazel and one to mix.
5
Fill the two halves of the mold, gently pressing the bath bomb mixture in each so they hold their shape. Mound a little extra powder in the center of each half of the mold. Wipe away any powder from the seams of the mold, match the eyelets of each side up, and press together. To avoid any imperfections on your bath bomb, make sure to direct pressure to the edges of the mold rather than the center. Continue filling up the bath bomb molds until the mixture is gone.
6
Allow the bath bombs to harden in the mold for 24 hours. Then, carefully remove them from the package.
7
Fill a bowl with a few tablespoons of Snowflake Sparkle Mica. The following steps can get a little messy, so you may want to lay down newspaper on your surface. Gently roll the bath bomb in the mica until completely covered. Use your fingers to spread it evenly and brush off any extra.
8
In separate containers, mix 1 teaspoon of King's Gold Mica and 1 teaspoon of Snowflake Sparkle Mica with 1 tablespoon of 99% isopropyl alcohol. Use a dropper to drizzle the mica on top of the bath bombs. Continue until you're happy with the look. Let the bath bombs dry for about 30 minutes. Then, place them back into the packaging. To use, place the bath bomb into a hot bath and enjoy!
Tutorial credits
Photographer: Amanda Kerzman
You will need:
- About 13 Bath Bomb Molds
- 32 oz. Baking Soda (Sodium Bicarbonate)
- 16 oz. Citric Acid
- 1 oz. Champagne Extract
- 0.5 oz. Polysorbate 80
- 9 mL Rose Quartz Fragrance Oil
- King's Gold Mica
- Snowflake Sparkle Mica
- Witch Hazel in a Spray Bottle
- 99% Isopropyl Alcohol
- Dropper
Follow these steps:
1
In a large bowl, mix together 32 ounces of baking soda and 16 ounces of citric acid. To get rid of clumps in the mixture, you can push the powders through a sifter or break them up with your fingers. Add 1 teaspoon of King's Gold Mica and stir. Note: Citric acid has a tendency to take off nail polish, so wear gloves to protect your manicure.
2
In a small container, add 1 ounce of champagne extract, 0.5 ounces of polysorbate and 9 mL of Rose Quartz Fragrance Oil. Stir together.
3
Add the liquids to the baking soda and citric acid. Use your hands to thoroughly mix all the ingredients together until there are no clumps.
4
Test the consistency of the bath bomb mixture. It should feel like wet sand and hold its shape when squeezed. This means it will hold its shape in the mold as well. If it’s too dry, use one hand to spritz the mixture with witch hazel and one to mix.
5
Fill the two halves of the mold, gently pressing the bath bomb mixture in each so they hold their shape. Mound a little extra powder in the center of each half of the mold. Wipe away any powder from the seams of the mold, match the eyelets of each side up, and press together. To avoid any imperfections on your bath bomb, make sure to direct pressure to the edges of the mold rather than the center. Continue filling up the bath bomb molds until the mixture is gone.
6
Allow the bath bombs to harden in the mold for 24 hours. Then, carefully remove them from the package.
7
Fill a bowl with a few tablespoons of Snowflake Sparkle Mica. The following steps can get a little messy, so you may want to lay down newspaper on your surface. Gently roll the bath bomb in the mica until completely covered. Use your fingers to spread it evenly and brush off any extra.
8
In separate containers, mix 1 teaspoon of King's Gold Mica and 1 teaspoon of Snowflake Sparkle Mica with 1 tablespoon of 99% isopropyl alcohol. Use a dropper to drizzle the mica on top of the bath bombs. Continue until you're happy with the look. Let the bath bombs dry for about 30 minutes. Then, place them back into the packaging. To use, place the bath bomb into a hot bath and enjoy!
Tutorial credits
Photographer: Amanda Kerzman
