Oat and Cashmere Lotion Projecthttps://www.brambleberry.com/in-the-studio/projects/body-care/lotion-and-butters/oat-and-cashmere-lotion-project/PS000052.html
This recipe combines skin-loving ingredients like oat oil, oat extract, and colloidal oatmeal. Colloidal oatmeal is a micro-fine ground powder that blends in smoothly without any grit or exfoliation. It’s well known for its calming properties, and it’s commonly added straight to bath water to soothe the skin.
- Skill Level: Intermediate
- Time to Complete: 1 hour
- Kit Yields: 24 ounces of lotion
Item#:IB000066 Varient/Quantity/Set: 0
Item#:IB003044 Varient/Quantity/Set: 0
Item#:IB003048 Varient/Quantity/Set: 0
Item#:IB000932 Varient/Quantity/Set: 0
Oat and Cashmere Lotion Project
Cashmere Fragrance Oil is a complex blend of white freesia, magnolia, blueberry, and violet. The moment we smelled it, we knew it would be perfect for this recipe.
Five to Six 4 oz. Bottles
18.5 oz. Distilled Water (77%)
0.2 oz. Colloidal Oatmeal (1%)
1.3 oz. Polawax Emulsifying Wax (5%)
0.7 oz. BTMS-50 Conditioning Emulsifier (3%)
1.7 oz. Oat Oil (7%)
0.5 oz. Avocado Oil (2%)
0.7 oz. Oat Extract (3%)
0.2 oz. Cashmere Fragrance Oil (1%)
0.2 oz. Optiphen (1%)
EQUIPMENT PREP: Disinfect your utensils by dipping them in a 5% bleach water solution and allowing to dry. This includes mixing containers, your stick blender, and any spoons or spatulas that may come in contact with your lotion. Your products must be as free of germs, bacteria, and microbes as possible. To be safe, bleach water all your utensils.
In a heat-safe container, add 18.5 ounces of distilled water. Heat in the microwave on 1 minute bursts until the water is about 160° F. Add 0.2 ounces of colloidal oatmeal to the water and use your stick blender to mix it in and break up any clumps.
In a separate heat-safe container, combine 1.7 ounces of oat oil, 0.5 ounces of avocado oil, 0.7 oz. oat extract, 1.3 ounces of Polawax Emulsifying Wax, and 0.7 ounces of BTMS-50. Heat the mixture in the microwave on 30-60 second bursts until the waxes are fully melted.
Check the temperature of both containers. Each one should be about 160°F (the oil mixture may be a little bit hotter). When they’re ready, tap your stick blender on the bottom of the bowl to release bubbles. Pour the oils and wax into the water and begin pulsing the stick blender. Blend the mixture for 60-90 seconds, making sure the oil and water phases are fully emulsified.
Continue stick blending until the temperature drops to about 130-140°F. Add 0.2 ounces of Cashmere Fragrance Oil and 0.2 ounces of Optiphen. Stick blend for another 60-90 seconds to fully combine.
Carefully pour the lotion into the containers – we used a funnel to help. Let the bottles sit overnight without a cap to prevent condensation. Once completely cooled, place the caps on the bottles, apply labels, and enjoy.
Photographer: Amanda Kerzman
SHARE YOUR EXPERIENCE
Email this project to your friends.
Let us know how it went by leaving a review, asking a question, or uploading your project photos.