Eclipse Soap Project

Images

CLOSE

Product Actions

Skill Level: Advanced
Time: 2 hours
Yield: About 3 pounds of soap

Project Description

This Eclipse Soap features moon and circle embeds to create a mystical design.

This Eclipse Soap is created by layering multiple embeds into the Tall 12" Silicone Loaf Mold. One of the moon embeds is carved into a thinner shape to create the appearance of an eclipse. We found the Clean Up Tool came in handy during this process, but a small spoon was best to smooth out the shape.

We scented this batch with Moon Child Fragrance Oil. It's a fresh scent with notes of white tea, thyme, tuberose, and honey. It complements the mystical eclipse design perfectly!

Because this project involves a lot of layering with melt and pour, we recommend having a few tools handy. It's important to spray with 99% isopropyl alcohol between each layer to help them stick together. You also need to be aware of the temperature of the soap, so an infrared thermometer is good to have. We recommend pouring the soap when it's 130-140° F so it doesn't melt the embeds. Patience is also key - this project requires waiting between each layer, but the end result is worth it!

Additional Information

  • Supplies
  • Instructions
  • Reviews
  • Q&A

Supplies

5 Ingredients
4 Tools
For All 9 Items
If an item is out of stock, it will not be added to your cart.
All 9 Items :
Moon Child Fragrance Oil - 1.75 oz
Moon Child Fragrance Oil - 1.75 oz Item#: IB003468
$5.12

$5.12
Plum Dusk Mica - 1 oz
Plum Dusk Mica - 1 oz Item#: IB002206
$3.25

$3.25
Fine Silver Rainbow EcoGlitter - 1 oz
Fine Silver Rainbow EcoGlitter - 1 oz Item#: IB001992
$7.99

$7.99
SFIC Clear Melt And Pour Soap Base - 1 lb
SFIC Clear Melt And Pour Soap Base - 1 lb Item#: IB002880
$4.19

$4.19
SFIC White Melt And Pour Soap Base - 1 lb
SFIC White Melt And Pour Soap Base - 1 lb Item#: IB002895
$4.19

$12.57
Mini Moon Silicone Column Mold
Mini Moon Silicone Column Mold Item#: IB002816
$13.49
Get 5 or More and Save 10%!

$13.49
Mini Round Silicone Column Mold
Mini Round Silicone Column Mold Item#: IB002811
$13.49
Get 5 or More and Save 10%!

$13.49
Tall 12 Silicone Loaf Mold
Tall 12 Silicone Loaf Mold Item#: IB002870
$22.99
Get 5 or More and Save 10%!

$22.99
8 oz Clear Bottle with White Spray Cap - 1
8 oz Clear Bottle with White Spray Cap - 1 Item#: IB500007
$1.99

$1.99

Instructions

Eclipse Soap Project

  • Skill Level: Advanced
  • Time: 2 hours
  • Yield: About 3 pounds of soap

This Eclipse Soap is created by layering multiple embeds into the Tall 12" Silicone Loaf Mold. One of the moon embeds is carved into a thinner shape to create the appearance of an eclipse. We found the Clean Up Tool came in handy during this process, but a small spoon was best to smooth out the shape.

We scented this batch with Moon Child Fragrance Oil. It's a fresh scent with notes of white tea, thyme, tuberose, and honey. It complements the mystical eclipse design perfectly!

Because this project involves a lot of layering with melt and pour, we recommend having a few tools handy. It's important to spray with 99% isopropyl alcohol between each layer to help them stick together. You also need to be aware of the temperature of the soap, so an infrared thermometer is good to have. We recommend pouring the soap when it's 130-140° F so it doesn't melt the embeds. Patience is also key - this project requires waiting between each layer, but the end result is worth it!

You will need:

  • Tall 12" Silicone Loaf Mold
  • Mini Moon Silicone Loaf Mold
  • Mini Round Silicone Column Mold
  • 45 oz. White Melt and Pour Soap Base
  • 16 oz. Clear Melt and Pour Soap Base
  • 1/2 tsp. Plum Dusk Mica
  • 1/4 tsp. Fine Silver Rainbow EcoGlitter
  • 1.2 oz. Moon Child Fragrance Oil 
  • 99% Isopropyl Alcohol in a Spray Bottle

Follow these steps:

1

Cut 16 ounces of Clear Melt and Pour Soap Base into small uniform chunks. Place the soap into a heat-safe continer and melt using 30 second bursts. Once completely melted, add 1/2 treaspoon of Plum Dusk Mica and 1/4 teaspoon Fine Silver Rainbow EcoGlitter. Mix into the soap thoroughly until there are no chunks of mica. 

2

Place the Mini Moon and Mini Round molds into a tall container to keep them upright. Pour the soap into the mold. Set the remaining soap aside for the third embed. Allow the soap in the mold to fully cool and harden. Remove the embeds and trim off any imperfections. Reheat and pour the remaining purple soap into the Mini Moon Silicone Column Mold and allow to harden. Remove from the mold and trim any imperfections. Tip: You can place the soap in the fridge to help speed up the cooling process. If you live in a humid area, this can increase the chance of glycerin dew.

3

Using a small spoon, carve one of the moon embeds into a thinner moon. Do your best to make it smooth and even throughout. Set all the embeds aside. Tip: We found the Clean Up Tool to be helpful during this process, but a small spoon worked best to create a smooth and even moon shape. 

4

Chop 45 ounces of White Melt and Pour Soap Base into small uniform pieces. Place it into a heat-safe container and melt using 30-60 second bursts. Once completely melted, stir in 1.2 ounces of Moon Child Fragrance Oil. Then, pour a thin layer of white soap into the mold. Spray with alcohol to get rid of bubbles and allow to harden.

5

If necessary, reheat the white soap in the microwave using 15-20 second bursts. Pour a small amount of white soap into the mold, spray with alcohol, and insert the thin moon into the wet soap facing up. Spray with alcohol and pour more white soap until the moon is completely covered and there's a small layer of white soap on top of the embed. Allow to cool and harden. Tip: When layering embeds in melt and pour soap, make sure the soap is about 130-140° F. If the soap is too hot, it can melt the embeds.

6

Reheat the white soap in the microwave using 15-20 second bursts. Pour a small amount of white soap into the mold, spray with alcohol, and insert the other moon embed into the wet soap facing up. Spray with alcohol and pour more white soap until the moon is completely covered and there's a small layer of white soap on top of the embed. Allow to cool and harden. 

7

Reheat the white soap in the microwave using 15-20 second bursts. Pour a small amount of white soap into the mold, spray with alcohol, and insert the circle embed into the wet soap. Spray with alcohol and pour more white soap on both sides of the circle embed. It won't be completely covered. Spray with alcohol to get rid of bubbles.  Allow to fully cool and harden for at least 3 hours or up to overnight. 

8

Once completely cooled and hardened, remove them from the mold and enjoy. To help prevent glycerin dew, wrap the soap in plastic wrap. Enjoy! Tip: We have found layers stay together better when you cut the soap from the side, instead of from the top down.

Tutorial credits

Photographer: Amanda Kerzman

Eclipse Soap Project

  • Skill Level: Advanced
  • Time: 2 hours
  • Yield: About 3 pounds of soap

This Eclipse Soap is created by layering multiple embeds into the Tall 12" Silicone Loaf Mold. One of the moon embeds is carved into a thinner shape to create the appearance of an eclipse. We found the Clean Up Tool came in handy during this process, but a small spoon was best to smooth out the shape.

We scented this batch with Moon Child Fragrance Oil. It's a fresh scent with notes of white tea, thyme, tuberose, and honey. It complements the mystical eclipse design perfectly!

Because this project involves a lot of layering with melt and pour, we recommend having a few tools handy. It's important to spray with 99% isopropyl alcohol between each layer to help them stick together. You also need to be aware of the temperature of the soap, so an infrared thermometer is good to have. We recommend pouring the soap when it's 130-140° F so it doesn't melt the embeds. Patience is also key - this project requires waiting between each layer, but the end result is worth it!

You will need:

  • Tall 12" Silicone Loaf Mold
  • Mini Moon Silicone Loaf Mold
  • Mini Round Silicone Column Mold
  • 45 oz. White Melt and Pour Soap Base
  • 16 oz. Clear Melt and Pour Soap Base
  • 1/2 tsp. Plum Dusk Mica
  • 1/4 tsp. Fine Silver Rainbow EcoGlitter
  • 1.2 oz. Moon Child Fragrance Oil 
  • 99% Isopropyl Alcohol in a Spray Bottle

Follow these steps:

1

Cut 16 ounces of Clear Melt and Pour Soap Base into small uniform chunks. Place the soap into a heat-safe continer and melt using 30 second bursts. Once completely melted, add 1/2 treaspoon of Plum Dusk Mica and 1/4 teaspoon Fine Silver Rainbow EcoGlitter. Mix into the soap thoroughly until there are no chunks of mica. 

2

Place the Mini Moon and Mini Round molds into a tall container to keep them upright. Pour the soap into the mold. Set the remaining soap aside for the third embed. Allow the soap in the mold to fully cool and harden. Remove the embeds and trim off any imperfections. Reheat and pour the remaining purple soap into the Mini Moon Silicone Column Mold and allow to harden. Remove from the mold and trim any imperfections. Tip: You can place the soap in the fridge to help speed up the cooling process. If you live in a humid area, this can increase the chance of glycerin dew.

3

Using a small spoon, carve one of the moon embeds into a thinner moon. Do your best to make it smooth and even throughout. Set all the embeds aside. Tip: We found the Clean Up Tool to be helpful during this process, but a small spoon worked best to create a smooth and even moon shape. 

4

Chop 45 ounces of White Melt and Pour Soap Base into small uniform pieces. Place it into a heat-safe container and melt using 30-60 second bursts. Once completely melted, stir in 1.2 ounces of Moon Child Fragrance Oil. Then, pour a thin layer of white soap into the mold. Spray with alcohol to get rid of bubbles and allow to harden.

5

If necessary, reheat the white soap in the microwave using 15-20 second bursts. Pour a small amount of white soap into the mold, spray with alcohol, and insert the thin moon into the wet soap facing up. Spray with alcohol and pour more white soap until the moon is completely covered and there's a small layer of white soap on top of the embed. Allow to cool and harden. Tip: When layering embeds in melt and pour soap, make sure the soap is about 130-140° F. If the soap is too hot, it can melt the embeds.

6

Reheat the white soap in the microwave using 15-20 second bursts. Pour a small amount of white soap into the mold, spray with alcohol, and insert the other moon embed into the wet soap facing up. Spray with alcohol and pour more white soap until the moon is completely covered and there's a small layer of white soap on top of the embed. Allow to cool and harden. 

7

Reheat the white soap in the microwave using 15-20 second bursts. Pour a small amount of white soap into the mold, spray with alcohol, and insert the circle embed into the wet soap. Spray with alcohol and pour more white soap on both sides of the circle embed. It won't be completely covered. Spray with alcohol to get rid of bubbles.  Allow to fully cool and harden for at least 3 hours or up to overnight. 

8

Once completely cooled and hardened, remove them from the mold and enjoy. To help prevent glycerin dew, wrap the soap in plastic wrap. Enjoy! Tip: We have found layers stay together better when you cut the soap from the side, instead of from the top down.

Tutorial credits

Photographer: Amanda Kerzman

You will need:

  • Tall 12" Silicone Loaf Mold
  • Mini Moon Silicone Loaf Mold
  • Mini Round Silicone Column Mold
  • 45 oz. White Melt and Pour Soap Base
  • 16 oz. Clear Melt and Pour Soap Base
  • 1/2 tsp. Plum Dusk Mica
  • 1/4 tsp. Fine Silver Rainbow EcoGlitter
  • 1.2 oz. Moon Child Fragrance Oil 
  • 99% Isopropyl Alcohol in a Spray Bottle

Follow these steps:

1

Cut 16 ounces of Clear Melt and Pour Soap Base into small uniform chunks. Place the soap into a heat-safe continer and melt using 30 second bursts. Once completely melted, add 1/2 treaspoon of Plum Dusk Mica and 1/4 teaspoon Fine Silver Rainbow EcoGlitter. Mix into the soap thoroughly until there are no chunks of mica. 

2

Place the Mini Moon and Mini Round molds into a tall container to keep them upright. Pour the soap into the mold. Set the remaining soap aside for the third embed. Allow the soap in the mold to fully cool and harden. Remove the embeds and trim off any imperfections. Reheat and pour the remaining purple soap into the Mini Moon Silicone Column Mold and allow to harden. Remove from the mold and trim any imperfections. Tip: You can place the soap in the fridge to help speed up the cooling process. If you live in a humid area, this can increase the chance of glycerin dew.

3

Using a small spoon, carve one of the moon embeds into a thinner moon. Do your best to make it smooth and even throughout. Set all the embeds aside. Tip: We found the Clean Up Tool to be helpful during this process, but a small spoon worked best to create a smooth and even moon shape. 

4

Chop 45 ounces of White Melt and Pour Soap Base into small uniform pieces. Place it into a heat-safe container and melt using 30-60 second bursts. Once completely melted, stir in 1.2 ounces of Moon Child Fragrance Oil. Then, pour a thin layer of white soap into the mold. Spray with alcohol to get rid of bubbles and allow to harden.

5

If necessary, reheat the white soap in the microwave using 15-20 second bursts. Pour a small amount of white soap into the mold, spray with alcohol, and insert the thin moon into the wet soap facing up. Spray with alcohol and pour more white soap until the moon is completely covered and there's a small layer of white soap on top of the embed. Allow to cool and harden. Tip: When layering embeds in melt and pour soap, make sure the soap is about 130-140° F. If the soap is too hot, it can melt the embeds.

6

Reheat the white soap in the microwave using 15-20 second bursts. Pour a small amount of white soap into the mold, spray with alcohol, and insert the other moon embed into the wet soap facing up. Spray with alcohol and pour more white soap until the moon is completely covered and there's a small layer of white soap on top of the embed. Allow to cool and harden. 

7

Reheat the white soap in the microwave using 15-20 second bursts. Pour a small amount of white soap into the mold, spray with alcohol, and insert the circle embed into the wet soap. Spray with alcohol and pour more white soap on both sides of the circle embed. It won't be completely covered. Spray with alcohol to get rid of bubbles.  Allow to fully cool and harden for at least 3 hours or up to overnight. 

8

Once completely cooled and hardened, remove them from the mold and enjoy. To help prevent glycerin dew, wrap the soap in plastic wrap. Enjoy! Tip: We have found layers stay together better when you cut the soap from the side, instead of from the top down.

Tutorial credits

Photographer: Amanda Kerzman

Reviews

Q&A

SHARE YOUR EXPERIENCE

Email this project to your friends.

Let us know how it went by leaving a review, asking a question, or uploading your project photos.