Marbled Lemon Soap Projecthttps://www.brambleberry.com/in-the-studio/projects/melt-and-pour/marbled-lemon-soap-project/PS000198.html
These Marbled Lemon Soaps are easy to make and they result in beautiful and unique bars each time. First, Honey and White Melt and Pour Soap Base is colored with natural activated charcoal and yellow Brazilian clay. The soap is poured into the 4 Cavity Hexagon Silicone Mold, swirling naturally as it does.
The recipe uses a full 16 ounces of both Honey and White Melt and Pour Soap Base. The mold has 4 cavities, so you'll have leftover soap. You can use 2 molds, make 2 batches, or cut the recipe in half.
- Skill Level: Beginner
- Time to Complete: 1 hour
- Kit Yields: About 10 bars
Item#:IB002889 Varient/Quantity/Set: 0
Item#:IB002895 Varient/Quantity/Set: 0
Item#:IB000191 Varient/Quantity/Set: 0
Item#:IB002615 Varient/Quantity/Set: 0
Item#:IB002023 Varient/Quantity/Set: 0
Item#:IB003538 Varient/Quantity/Set: 0
Item#:IB000006 Varient/Quantity/Set: 0
Marbled Lemon Soap Project
This melt and pour project is perfect for beginners, and it results in unique bars each time.
4 Cavity Hexagon Silicone Mold
16 oz. Honey Melt and Pour Soap Base
16 oz. White Melt and Pour Soap Base
1 tsp. Activated Charcoal
1 tsp. Yellow Brazilian Clay
2 Tbsp. Chamomile Extract
10 mL Lemon Essential Oil
99% Isopropyl Alcohol in a Spray Bottle
Chop 16 ounces of Honey Melt and Pour Soap Base and 16 ounces of White Melt and Pour Soap Base into small, uniform cubes. Place them into separate heat-safe containers and melt in the microwave using 30 second bursts.
In separate containers, mix 1 teaspoon of activated charcoal and 1 teaspoon of yellow Brazilian clay with 1 tablespoon of chamomile extract. Use a mini mixer to get rid of any clumps. Add the charcoal to the melted honey soap and the yellow Brazilian clay to the melted white soap. Thoroughly mix.
Add 5 mL of lemon essential oil to each container and stir thoroughly.
The ideal swirling temperature is between 120-130° F. Once the soap is at that temperature, carefully pour both colors into one cavity at the same time. It will naturally swirl as you pour. Continue until all the mold cavities are full and spritz the top with alcohol to get rid of bubbles. Set the remaining soap aside and allow the soap in the mold to fully cool and harden for 4-6 hours.
Remove each bar from the mold. Gently reheat the leftover soap in the microwave using 20 second bursts and pour it into each mold cavity. Wrap each bar in plastic wrap to prevent glycerin dew. Enjoy!
Photographer: Amanda Kerzman
SHARE YOUR EXPERIENCEPinterest Facebook Twitter Instagram Email
Email this project to your friends.
Let us know how it went by leaving a review, asking a question, or uploading your project photos.