Bourbon and Beeswax Candles Project image number null
Bourbon and Beeswax Candles Project image number null

Bourbon and Beeswax Candles Project

Item No. PS000126
undefined out of 5 Customer Rating
LEVEL Beginner
TIME 1 hour
YIELD 5 candle tins
COST
$34.35
In these candles, Kentucky Bourbon Fragrance Oil and the natural smoky scent from yellow beeswax create an irresistible combination.

The natural smoky scent of Yellow Beeswax pairs perfectly with Kentucky Bourbon Fragrance Oil, which is a warm mix of orange, clove, midnight orchid, and oak.

Because beeswax has such a high melting point, you’ll have some extra considerations when working with it. It can be melted in a double boiler or in a microwave. Just make sure your container is suitable for such high heat.

Want more candle making supplies? Check out these DIY candle making recipes.

What You Need:

IB003001
Silver Candle Tins

Silver Candle Tins - 6 tins

6 Tins
$4.99
IB003080
Wu-250 Brown Cotton Candle Wicks

Wu-250 Brown Cotton Candle Wicks - 10 wicks

10 wicks
$1.99
IB003036
Yellow Beeswax

Yellow Beeswax - 1 lb

1 lb
$11.99
IB000578
Kentucky Bourbon Fragrance Oil

Kentucky Bourbon Fragrance Oil - 2 oz

2 oz
$9.39
IB004931
Wick Stickers

Wick Stickers - 10 Sheets (100 Stickers)

1 pack (100 stickers)
$5.99
$34.35
3 products 2 tools

Recipe

INGREDIENTS:
  • Yellow Beeswax - 1 lb
  • Kentucky Bourbon Fragrance Oil - 2 oz
  • Wick Stickers - 10 Sheets (100 Stickers)
EQUIPMENT:
  • Silver Candle Tins - 6 tins
  • Wu-250 Brown Cotton Candle Wicks - 10 wicks

Instructions

You will need:

  • 5 Candle Tins
  • 5 Wu-150 White Cotton Candle Wicks
  • 16 oz. Yellow Beeswax
  • 1.3 oz. Kentucky Bourbon Fragrance Oil
  • 5 Plastic Straws

WICK PREP: There are several methods for steadying the wick in your candle tin. One of the easiest involves a plastic straw. Cut the straw lengthwise to the middle and slide the wick into the slit. Place the straw across the top of the candle tin and adjust the wick so it touches the bottom of the candle tin. Repeat this process for each wick and set aside.

Follow these steps:

1

Melt 16 ounces of beeswax in a double boiler. Alternatively, you can melt it in the microwave. Be careful – because of beeswax’s high melting point, even a heat-safe container can melt or explode in the microwave if it gets too hot. If you do use a microwave, melt using 1 minute bursts and stir frequently.

2

Add 1.3 ounces of Kentucky Bourbon Fragrance Oil and stir into the wax. It’s normal for some of the beeswax to solidify when it comes in contact with the oil. Stir until the solid beeswax melts.

3

Pour the wax into each candle tin. Then, place each wick in the center of the candle, making sure it touches the bottom of the tin.

CLEAN UP TIP: Beeswax is tricky to clean because it has such a high melting point. Immediately after pouring the candles, use a paper towel to wipe any excess hot wax from the bowl and stirring utensils. The more wax you can wipe out, the better. If necessary, clean with extremely hot water and dish soap.

4

Allow the wax to fully cool and harden. This will take several hours. Once the candles are completely firm, light and enjoy. Of course, never leave your candle unattended.

Tutorial credits

Photographer: Amanda Kerzman

See more

Bourbon and Beeswax Candles Project

  • LEVEL Beginner
  • TIME 1 hour
  • YIELD 5 candle tins

The natural smoky scent of Yellow Beeswax pairs perfectly with Kentucky Bourbon Fragrance Oil, which is a warm mix of orange, clove, midnight orchid, and oak.

Because beeswax has such a high melting point, you’ll have some extra considerations when working with it. It can be melted in a double boiler or in a microwave. Just make sure your container is suitable for such high heat.

Want more candle making supplies? Check out these DIY candle making recipes.

You will need:

  • 5 Candle Tins
  • 5 Wu-150 White Cotton Candle Wicks
  • 16 oz. Yellow Beeswax
  • 1.3 oz. Kentucky Bourbon Fragrance Oil
  • 5 Plastic Straws

WICK PREP: There are several methods for steadying the wick in your candle tin. One of the easiest involves a plastic straw. Cut the straw lengthwise to the middle and slide the wick into the slit. Place the straw across the top of the candle tin and adjust the wick so it touches the bottom of the candle tin. Repeat this process for each wick and set aside.

Follow these steps:

1

Melt 16 ounces of beeswax in a double boiler. Alternatively, you can melt it in the microwave. Be careful – because of beeswax’s high melting point, even a heat-safe container can melt or explode in the microwave if it gets too hot. If you do use a microwave, melt using 1 minute bursts and stir frequently.

2

Add 1.3 ounces of Kentucky Bourbon Fragrance Oil and stir into the wax. It’s normal for some of the beeswax to solidify when it comes in contact with the oil. Stir until the solid beeswax melts.

3

Pour the wax into each candle tin. Then, place each wick in the center of the candle, making sure it touches the bottom of the tin.

CLEAN UP TIP: Beeswax is tricky to clean because it has such a high melting point. Immediately after pouring the candles, use a paper towel to wipe any excess hot wax from the bowl and stirring utensils. The more wax you can wipe out, the better. If necessary, clean with extremely hot water and dish soap.

4

Allow the wax to fully cool and harden. This will take several hours. Once the candles are completely firm, light and enjoy. Of course, never leave your candle unattended.

Tutorial credits

Photographer: Amanda Kerzman