Shamrock Soap Project image number null
Shamrock Soap Project image number null
Shamrock Soap Project image number null

Shamrock Soap Project

Item No. PS000351
undefined out of 5 Customer Rating
LEVEL Intermediate
TIME 2 hours
YIELD 6 bars of soap
COST
$55.06
These adorable Shamrock Soaps are a great way to celebrate St. Patrick's Day, or just bring a little luck all year round!

The first step is to create the clover embeds, using the Mini Heart Silicone Column Mold. Then, the embeds are placed on a layer of  Buttermilk Melt and Pour Soap Base and covered with Clear Melt And Pour Soap Base. These bars are scented with Clover and Aloe Fragrance Oil, which adds a fresh scent with notes of green tea, rose, and moss.

This project requires a good understanding of layering melt and pour soap, and the importance of temperature. If you've never made melt and pour soap before, we recommend starting with a few beginner recipes.

What You Need:

IB002812
Mini Heart Silicone Column Mold

Mini Heart Silicone Column Mold

1 mold
$13.99
IB002849
6 Cavity Silicone Circle Mold

6 Cavity Silicone Circle Mold - 1 Mold

1 mold
$18.99
IB004263
SFIC Buttermilk Melt and Pour Soap Base

SFIC Buttermilk Melt and Pour Soap Base - 1 lb

1 lb
$5.99
IB002880
SFIC Clear Melt And Pour Soap Base

SFIC Clear Melt And Pour Soap Base - 1 lb

1 lb
$6.99
M900204
Kermit Green Color Block

Kermit Green Color Block - 1 Block

1 color block
$1.99
M900065
Green Chrome Color Block

Green Chrome Color Block - 1 Block

1 color block
$1.99
IB001363
Clover and Aloe Fragrance Oil

Clover and Aloe Fragrance Oil - 1.75 oz

1.75 oz
$5.12 Price reduced from $6.40 to
$55.06
5 products 2 tools

Recipe

INGREDIENTS:
  • SFIC Buttermilk Melt and Pour Soap Base - 1 lb
  • SFIC Clear Melt And Pour Soap Base - 1 lb
  • Kermit Green Color Block - 1 Block
  • Green Chrome Color Block - 1 Block
  • Clover and Aloe Fragrance Oil - 1.75 oz
EQUIPMENT:
  • Mini Heart Silicone Column Mold
  • 6 Cavity Silicone Circle Mold - 1 Mold

Instructions

You will need:

Embeds:

  • Mini Heart Silicone Column Mold
  • 4 oz. Clear Melt and Pour Soap
  • Green Chrome Color Block
  • Kermit Green Color Block

Base:

  • 6 Cavity Silicone Circle Mold
  • 16 oz. Buttermilk Melt and Pour Soap Base
  • 8 oz. Clear Melt and Pour Soap Base
  • 0.4 oz. Clover and Aloe Fragrance Oil
  • 99% Isopropyl Alcohol in a Spray Bottle

Follow these steps:

1

Chop 4 ounces of Clear Melt and Pour Soap Base into small, uniform cubes. Place them in a heat-safe container and add a small chunk of the Kermit Green and Green Chrome Color Blocks. Melt in the microwave using 10-15 second bursts. Stir to fully incorporate the Color Blocks. 

2

Pour the melted soap into the Mini Heart Silicone Column Mold. Set the mold aside and allow the soap to cool and harden for about 1 hour. Then, remove the embed from the mold and chop the hearts into small pieces, about one cm wide. You need 18 hearts total - 3 for each circle cavity. 

3

Chop 16 ounces of Buttermilk Melt and Pour Soap into small uniform pieces. Place in a heat-safe container and melt using 20-30 second bursts. Once melted, add 0.4 ounces of Aloe and Clover Fragrance Oil and stir in thoroughly.

4

Pour the soap into each cavity about 3/4 of the way full. After each pour, spritz with 99% isopropyl alcohol to get rid of bubbles. Fill all six cavities and allow the soap to cool and harden for about 20 minutes. 

5

Once the buttermilk soap has cooled slightly and has formed a thick enough layer to support the embeds, gently place three heart embeds on top, with the heart corners meeting in the middle.

6

Chop 8 ounces of Clear Melt and Pour soap into small uniform pieces. Melt in the microwave using 5-10 second bursts. Allow the soap to become fairly hot, around 140-150 degrees F. Let the soap sit in the container and allow the bubbles to rise to the top. Once the soap has cooled to about 130 degrees F, spritz the buttermilk soap with alcohol and gently pour the clear soap on top, covering the heart embeds. Spray immediately with alcohol to pop any bubbles that occur.

7

Allow the soap to fully cool and harden for at least 4 hours or up to overnight. Remove from the mold and enjoy! 

Tutorial credits

Photographer: Amanda Kerzman

See more

Shamrock Soap Project

  • LEVEL Intermediate
  • TIME 2 hours
  • YIELD 6 bars of soap

The first step is to create the clover embeds, using the Mini Heart Silicone Column Mold. Then, the embeds are placed on a layer of  Buttermilk Melt and Pour Soap Base and covered with Clear Melt And Pour Soap Base. These bars are scented with Clover and Aloe Fragrance Oil, which adds a fresh scent with notes of green tea, rose, and moss.

This project requires a good understanding of layering melt and pour soap, and the importance of temperature. If you've never made melt and pour soap before, we recommend starting with a few beginner recipes.

You will need:

Embeds:

  • Mini Heart Silicone Column Mold
  • 4 oz. Clear Melt and Pour Soap
  • Green Chrome Color Block
  • Kermit Green Color Block

Base:

  • 6 Cavity Silicone Circle Mold
  • 16 oz. Buttermilk Melt and Pour Soap Base
  • 8 oz. Clear Melt and Pour Soap Base
  • 0.4 oz. Clover and Aloe Fragrance Oil
  • 99% Isopropyl Alcohol in a Spray Bottle

Follow these steps:

1

Chop 4 ounces of Clear Melt and Pour Soap Base into small, uniform cubes. Place them in a heat-safe container and add a small chunk of the Kermit Green and Green Chrome Color Blocks. Melt in the microwave using 10-15 second bursts. Stir to fully incorporate the Color Blocks. 

2

Pour the melted soap into the Mini Heart Silicone Column Mold. Set the mold aside and allow the soap to cool and harden for about 1 hour. Then, remove the embed from the mold and chop the hearts into small pieces, about one cm wide. You need 18 hearts total - 3 for each circle cavity. 

3

Chop 16 ounces of Buttermilk Melt and Pour Soap into small uniform pieces. Place in a heat-safe container and melt using 20-30 second bursts. Once melted, add 0.4 ounces of Aloe and Clover Fragrance Oil and stir in thoroughly.

4

Pour the soap into each cavity about 3/4 of the way full. After each pour, spritz with 99% isopropyl alcohol to get rid of bubbles. Fill all six cavities and allow the soap to cool and harden for about 20 minutes. 

5

Once the buttermilk soap has cooled slightly and has formed a thick enough layer to support the embeds, gently place three heart embeds on top, with the heart corners meeting in the middle.

6

Chop 8 ounces of Clear Melt and Pour soap into small uniform pieces. Melt in the microwave using 5-10 second bursts. Allow the soap to become fairly hot, around 140-150 degrees F. Let the soap sit in the container and allow the bubbles to rise to the top. Once the soap has cooled to about 130 degrees F, spritz the buttermilk soap with alcohol and gently pour the clear soap on top, covering the heart embeds. Spray immediately with alcohol to pop any bubbles that occur.

7

Allow the soap to fully cool and harden for at least 4 hours or up to overnight. Remove from the mold and enjoy! 

Tutorial credits

Photographer: Amanda Kerzman