CBD and Hemp Face Oil Project

Images

CLOSE

Product Actions

Skill Level: Beginner
Yield: 1 ounce of oil

Project Description

This face oil is full of antioxidants, fatty acids, and vitamins. It moisturizes and soothes skin.

This recipe feels amazing. It's made with luxurious and skin-loving ingredients like hemp seed oil, borage oil, and squalane oil. The result is a product full of fatty acids, antioxidants, and vitamins E and A. 

Hemp seed oil does have a nutty scent - we added a dash of lavender 40/42 essential oil to combat the smell, but you can skip that step if you like. To use, apply the oil to clean skin and don't rinse. We recommend using it at night.

Click here to learn more about using CBD oil in your bath and beauty products. For this project, we used a full spectrum CBD oil from Ology Essentials. Be sure to select an oil-based product for this recipe, not one that's made with water or alcohol.

This recipe is for 1 ounce of face oil and it contains 100 mg of CBD. You can add more or less based on your preference and the concentration of your oil. If you don't have CBD or don't want to add it, just add more of the other skincare oils to make up the difference.

Check out our DIY skincare kits for more skincare ideas.

Additional Information

  • Supplies
  • Instructions
  • Reviews
  • Q&A

Supplies

5 Ingredients
If an item is out of stock, it will not be added to your cart.
All 5 Items :
Natural Hemp Seed Oil - 1 lb
Natural Hemp Seed Oil - 1 lb Item#: IB002383
$11.99

$11.99
Squalane Oil - 1 oz
Squalane Oil - 1 oz Item#: IB003182
$6.99

$6.99
Borage Oil - 4 oz
Borage Oil - 4 oz Item#: IB002498
$13.99

$13.99
Sunflower Oil - 1 lb
Sunflower Oil - 1 lb Item#: IB002376
$7.99

$7.99
Lavender 40/42 Essential Oil - 1.75 oz
Lavender 40/42 Essential Oil - 1.75 oz Item#: IB000265
$11.99

$11.99

Instructions

CBD and Hemp Face Oil Project

  • Skill Level: Beginner
  • Time:
  • Yield: 1 ounce of oil

This recipe feels amazing. It's made with luxurious and skin-loving ingredients like hemp seed oil, borage oil, and squalane oil. The result is a product full of fatty acids, antioxidants, and vitamins E and A. 

Hemp seed oil does have a nutty scent - we added a dash of lavender 40/42 essential oil to combat the smell, but you can skip that step if you like. To use, apply the oil to clean skin and don't rinse. We recommend using it at night.

Click here to learn more about using CBD oil in your bath and beauty products. For this project, we used a full spectrum CBD oil from Ology Essentials. Be sure to select an oil-based product for this recipe, not one that's made with water or alcohol.

This recipe is for 1 ounce of face oil and it contains 100 mg of CBD. You can add more or less based on your preference and the concentration of your oil. If you don't have CBD or don't want to add it, just add more of the other skincare oils to make up the difference.

Check out our DIY skincare kits for more skincare ideas.

You will need:

  • 0.3 oz. Hemp Seed Oil
  • 0.3 oz. Squalane Oil
  • 0.2 oz. Borage Oil
  • 0.2 oz. Sunflower Oil
  • 4 mL CBD Oil (100 mg) *See note
  • 1 mL Lavender 40/42 Essential Oil (optional)

Follow these steps:

1

In a small container, add 0.3 ounces of hemp seed oil, 0.3 ounces of squalane oil, 0.2 ounces of borage oil, and 0.2 ounces of sunflower oil. Mix together. 

2

Add 4 mL of CBD oil and mix thoroughly. 

3

Add 1 mL of lavender 40/42 essential oil. Mix thoroughly.

4

Carefully pour the oil into the container of your choice. 

5

To use, shake and apply a few drops of the oil. Do not rinse. Recommended for use at night. 

CBD and Hemp Face Oil Project

  • Skill Level: Beginner
  • Time:
  • Yield: 1 ounce of oil

This recipe feels amazing. It's made with luxurious and skin-loving ingredients like hemp seed oil, borage oil, and squalane oil. The result is a product full of fatty acids, antioxidants, and vitamins E and A. 

Hemp seed oil does have a nutty scent - we added a dash of lavender 40/42 essential oil to combat the smell, but you can skip that step if you like. To use, apply the oil to clean skin and don't rinse. We recommend using it at night.

Click here to learn more about using CBD oil in your bath and beauty products. For this project, we used a full spectrum CBD oil from Ology Essentials. Be sure to select an oil-based product for this recipe, not one that's made with water or alcohol.

This recipe is for 1 ounce of face oil and it contains 100 mg of CBD. You can add more or less based on your preference and the concentration of your oil. If you don't have CBD or don't want to add it, just add more of the other skincare oils to make up the difference.

Check out our DIY skincare kits for more skincare ideas.

You will need:

  • 0.3 oz. Hemp Seed Oil
  • 0.3 oz. Squalane Oil
  • 0.2 oz. Borage Oil
  • 0.2 oz. Sunflower Oil
  • 4 mL CBD Oil (100 mg) *See note
  • 1 mL Lavender 40/42 Essential Oil (optional)

Follow these steps:

1

In a small container, add 0.3 ounces of hemp seed oil, 0.3 ounces of squalane oil, 0.2 ounces of borage oil, and 0.2 ounces of sunflower oil. Mix together. 

2

Add 4 mL of CBD oil and mix thoroughly. 

3

Add 1 mL of lavender 40/42 essential oil. Mix thoroughly.

4

Carefully pour the oil into the container of your choice. 

5

To use, shake and apply a few drops of the oil. Do not rinse. Recommended for use at night. 

You will need:

  • 0.3 oz. Hemp Seed Oil
  • 0.3 oz. Squalane Oil
  • 0.2 oz. Borage Oil
  • 0.2 oz. Sunflower Oil
  • 4 mL CBD Oil (100 mg) *See note
  • 1 mL Lavender 40/42 Essential Oil (optional)

Follow these steps:

1

In a small container, add 0.3 ounces of hemp seed oil, 0.3 ounces of squalane oil, 0.2 ounces of borage oil, and 0.2 ounces of sunflower oil. Mix together. 

2

Add 4 mL of CBD oil and mix thoroughly. 

3

Add 1 mL of lavender 40/42 essential oil. Mix thoroughly.

4

Carefully pour the oil into the container of your choice. 

5

To use, shake and apply a few drops of the oil. Do not rinse. Recommended for use at night. 

Reviews

Q&A

SHARE YOUR EXPERIENCE

Let us know how it went by leaving a review, asking a question, or uploading your project photos.