Chrysanthemum Soap Project image number null
Chrysanthemum Soap Project image number null

Chrysanthemum Soap Project

Item No. PS000047
undefined out of 5 Customer Rating
LEVEL Intermediate
TIME 2 hours
YIELD About 3 pounds of soap
COST
$160.85
This cold process soap is inspired by chrysanthemum flowers. They’re the perfect finishing touch!

This Chrysanthemum Cold Process Soap is made with melt and pour embeds and chrysanthemum flowers to create the appearance of a flower and stem. Poppy seeds add exfoliation, and White Lily and Aloe Fragrance Oil gives the bars a fresh scent that's perfect for spring and beyond.

The base of the soap is made using skin-loving ingredients like aloe butter and avocado butter. We recommend using LCP Melt And Pour Soap Base for the embeds. It has less glycerin, so it's less likely to sweat and melt inside the cold process soap base. Learn more about different kinds of melt and pour bases here.

What You Need:

IB003155
White Lily and Aloe Fragrance Oil

White Lily and Aloe Fragrance Oil - 2 oz

2 oz
$7.09
IB003186
Chrysanthemum Flowers

Chrysanthemum Flowers - 3 oz

3 oz
$33.19
IB002149
Sodium Hydroxide Lye

Sodium Hydroxide Lye

1 - 32 oz jar
$15.69
IB003176
Aloe Butter

Aloe Butter - 8 oz

8 oz
$10.99
IB002371
Avocado Butter

Avocado Butter - 1 lb

1 lb
$18.99
IB002365
Olive Oil - Pomace

Olive Oil - Pomace - 1 lb

1 lb
$9.39
IB002323
Castor Oil

Castor Oil - 1 lb

1 lb
$6.99
IB002326
Coconut Oil

Coconut Oil - 1 lb

1 lb
$5.99
IB002886
SFIC LCP White Melt And Pour Soap Base

SFIC LCP White Melt And Pour Soap Base - 1 lb

1 lb
$6.59
M900065
Green Chrome Color Block

Green Chrome Color Block - 1 Block

1 color block
$1.99
IB002578
Poppy Seeds

Poppy Seeds - 3 oz

3 oz
$4.99
IB002898
SFIC LCP Clear Melt And Pour Soap Base

SFIC LCP Clear Melt And Pour Soap Base - 1 lb

1 lb
$6.59
IB002531
Titanium Dioxide Pigment

Titanium Dioxide Pigment - 1 oz

1 oz
$2.99
IB002867
10 inch Silicone Loaf Mold

10 inch Silicone Loaf Mold

1 mold
$22.99
IB002379
Palm Oil

Palm Oil - 1 lb

1 lb
$6.39
$160.85
14 products 1 tools

Recipe

INGREDIENTS:
  • White Lily and Aloe Fragrance Oil - 2 oz
  • Chrysanthemum Flowers - 3 oz
  • Sodium Hydroxide Lye
  • Aloe Butter - 8 oz
  • Avocado Butter - 1 lb
  • Olive Oil - Pomace - 1 lb
  • Castor Oil - 1 lb
  • Coconut Oil - 1 lb
  • SFIC LCP White Melt And Pour Soap Base - 1 lb
  • Green Chrome Color Block - 1 Block
  • Poppy Seeds - 3 oz
  • SFIC LCP Clear Melt And Pour Soap Base - 1 lb
  • Titanium Dioxide Pigment - 1 oz
  • Palm Oil - 1 lb
EQUIPMENT:
  • 10 inch Silicone Loaf Mold

Instructions

You will need:

  • Embed: 
  • 5 oz. LCP Clear Melt and Pour Soap Base
  • 1 oz. LCP White Melt and Pour Soap Base
  • Green Chrome Color Block
  • Base:
  • 10" Silicone Loaf Mold
  • 2 oz. Aloe Butter (6%)
  • 2 oz. Avocado Butter (6%)
  • 13.2 oz. Olive Oil (40%)
  • 1 oz. Castor Oil (3%)
  • 8.3 oz. Palm Oil (25%)
  • 6.6 oz. Coconut Oil (20%)
  • 4.7 oz. Sodium Hydroxide Lye
  • 9.4 oz. Distilled Water (10% water discount)
  • 2 oz. White Lily and Aloe Fragrance Oil
  • 1 tsp. Titanium Dioxide
  • 1/2 tsp. Poppy Seeds
  • Chrysanthemum Flowers

EMBED PREP: Chop 5 ounces of LCP Clear Melt and Pour Soap Base along with 1 ounce of LCP White Melt and Pour Soap Base into small uniform cubes. Place it into a heat-safe container along with a chunk of the Green Chrome Color Block.

Melt the soap in the microwave using 15 second bursts. Be careful to not let the soap get too hot and burn. If you'd like a more saturated color, add more Green Chrome Color Block. Stir to fully mix in the color. 

Pour the soap into the bottom of the 10" Silicone Loaf Mold. Allow it to fully cool and harden (about an hour). Remove it from the mold. Place the embed into the mold vertically and trim the top so it's the same height as the mold. Set embed aside. 

COLORANT PREP: Disperse 1 teaspoon of titanium dioxide into 1 tablespoon of a lightweight liquid oil such as sunflower or sweet almond. Optional: To ensure the titanium dioxide blends smoothly into the soap, we recommend micronizing it before dispersing it in oil. Use a coffee grinder to break up any clumps of color and prevent streaks of white from showing in the final soap. We like to use a coffee grinder that has a removable stainless steel mixing area for easy cleaning. 

FRAGRANCE PREP: In a glass container, measure out 2 ounces of White Lily and Aloe Fragrance Oil. Set aside. 

SAFETY FIRST: Suit up for safe handling practices. That means goggles, gloves, and long sleeves. Make sure kids, pets, other distractions, and tripping hazards are out of the house or don’t have access to your space. Always make soap in a well-ventilated area.

Follow these steps:

1

Chop 5 ounces of LCP Clear Melt and Pour Soap Base along with 1 ounce of LCP White Melt and Pour Soap Base into small uniform cubes. Place it into a heat-safe container along with a chunk of the Green Chrome Color Block.

2

Melt the soap in the microwave using 15 second bursts. Be careful to not let the soap get too hot and burn. If you'd like a more saturated color, add more Green Chrome Color Block. Stir to fully mix in the color. 

3

Pour the soap into the bottom of the 10" Silicone Loaf Mold. Allow it to fully cool and harden (about an hour). Remove it from the mold. Place the embed into the mold vertically and trim the top so it's the same height as the mold. Set embed aside. 

4

Slowly and carefully add 4.7 ounces of lye to 9.4 ounces of distilled water. Gently stir until the lye has fully dissolved. Set it aside to cool. Optional: Add 2 teaspoons of sodium lactate to help the bars harden more quickly.

5

Melt and combine 2 ounces of aloe butter, 2 ounces of avocado butter, 13.2 ounces of olive oil, 1 ounce of castor oil, 6.6 ounces of coconut oil, and 8.3 ounces of palm oil (completely melt the entire container of palm oil before portioning) into a large mixing bowl. Once the lye water and the oils have cooled to 130° F or below (and are ideally within 10 degrees of each other), add the lye water to the oils and stick blend the mixture to a thin trace. 

6

Add all of the dispersed titanium dioxide to the soap and mix in thoroughly using a whisk. 

7

Add all of measured fragrance oil into the soap and stir thoroughly with a whisk. If the soap is still at a thin trace, pulse it with the stick blender using short bursts until it reaches a medium trace. This thicker texture will help the embed stay in place. 

8

Add 1/2 teaspoon of poppy seeds and stir in thoroughly using a whisk. 

9

Pour all of the soap into the mold, and tap the mold on the counter to help get rid of bubbles.

10

Insert the green melt and pour embed into the soap. We inserted it at a slight angle so that the stem would be in a different part of each bar when cut. 

11

Use a spoon to give the soap texture and make sure the top of the embed is covered. 

12

Place chrysanthemum flowers on top of the embed until it's completely covered. Continue to place flowers into the soap until you're happy with the look. 

13

Spritz the top of the soap with 99% isopropyl alcohol to prevent soda ash. Leave the soap uncovered - you don't want it to get too hot because the embed can melt. If you live in a very hot climate, place the soap in the fridge or freezer for 4-6 hours to prevent gel phase. 

14

Allow the soap to stay in the mold for about 2-3 days. Remove from the silicone mold, and allow the bars to cure for 4-6 weeks. Enjoy!

Tutorial credits

Photographer: Amanda Kerzman, Christina Becker

See more

Chrysanthemum Soap Project

  • LEVEL Intermediate
  • TIME 2 hours
  • YIELD About 3 pounds of soap

This Chrysanthemum Cold Process Soap is made with melt and pour embeds and chrysanthemum flowers to create the appearance of a flower and stem. Poppy seeds add exfoliation, and White Lily and Aloe Fragrance Oil gives the bars a fresh scent that's perfect for spring and beyond.

The base of the soap is made using skin-loving ingredients like aloe butter and avocado butter. We recommend using LCP Melt And Pour Soap Base for the embeds. It has less glycerin, so it's less likely to sweat and melt inside the cold process soap base. Learn more about different kinds of melt and pour bases here.

You will need:

  • Embed: 
  • 5 oz. LCP Clear Melt and Pour Soap Base
  • 1 oz. LCP White Melt and Pour Soap Base
  • Green Chrome Color Block
  • Base:
  • 10" Silicone Loaf Mold
  • 2 oz. Aloe Butter (6%)
  • 2 oz. Avocado Butter (6%)
  • 13.2 oz. Olive Oil (40%)
  • 1 oz. Castor Oil (3%)
  • 8.3 oz. Palm Oil (25%)
  • 6.6 oz. Coconut Oil (20%)
  • 4.7 oz. Sodium Hydroxide Lye
  • 9.4 oz. Distilled Water (10% water discount)
  • 2 oz. White Lily and Aloe Fragrance Oil
  • 1 tsp. Titanium Dioxide
  • 1/2 tsp. Poppy Seeds
  • Chrysanthemum Flowers

EMBED PREP: Chop 5 ounces of LCP Clear Melt and Pour Soap Base along with 1 ounce of LCP White Melt and Pour Soap Base into small uniform cubes. Place it into a heat-safe container along with a chunk of the Green Chrome Color Block.

Melt the soap in the microwave using 15 second bursts. Be careful to not let the soap get too hot and burn. If you'd like a more saturated color, add more Green Chrome Color Block. Stir to fully mix in the color. 

Pour the soap into the bottom of the 10" Silicone Loaf Mold. Allow it to fully cool and harden (about an hour). Remove it from the mold. Place the embed into the mold vertically and trim the top so it's the same height as the mold. Set embed aside. 

COLORANT PREP: Disperse 1 teaspoon of titanium dioxide into 1 tablespoon of a lightweight liquid oil such as sunflower or sweet almond. Optional: To ensure the titanium dioxide blends smoothly into the soap, we recommend micronizing it before dispersing it in oil. Use a coffee grinder to break up any clumps of color and prevent streaks of white from showing in the final soap. We like to use a coffee grinder that has a removable stainless steel mixing area for easy cleaning. 

FRAGRANCE PREP: In a glass container, measure out 2 ounces of White Lily and Aloe Fragrance Oil. Set aside. 

SAFETY FIRST: Suit up for safe handling practices. That means goggles, gloves, and long sleeves. Make sure kids, pets, other distractions, and tripping hazards are out of the house or don’t have access to your space. Always make soap in a well-ventilated area.

Follow these steps:

1

Chop 5 ounces of LCP Clear Melt and Pour Soap Base along with 1 ounce of LCP White Melt and Pour Soap Base into small uniform cubes. Place it into a heat-safe container along with a chunk of the Green Chrome Color Block.

2

Melt the soap in the microwave using 15 second bursts. Be careful to not let the soap get too hot and burn. If you'd like a more saturated color, add more Green Chrome Color Block. Stir to fully mix in the color. 

3

Pour the soap into the bottom of the 10" Silicone Loaf Mold. Allow it to fully cool and harden (about an hour). Remove it from the mold. Place the embed into the mold vertically and trim the top so it's the same height as the mold. Set embed aside. 

4

Slowly and carefully add 4.7 ounces of lye to 9.4 ounces of distilled water. Gently stir until the lye has fully dissolved. Set it aside to cool. Optional: Add 2 teaspoons of sodium lactate to help the bars harden more quickly.

5

Melt and combine 2 ounces of aloe butter, 2 ounces of avocado butter, 13.2 ounces of olive oil, 1 ounce of castor oil, 6.6 ounces of coconut oil, and 8.3 ounces of palm oil (completely melt the entire container of palm oil before portioning) into a large mixing bowl. Once the lye water and the oils have cooled to 130° F or below (and are ideally within 10 degrees of each other), add the lye water to the oils and stick blend the mixture to a thin trace. 

6

Add all of the dispersed titanium dioxide to the soap and mix in thoroughly using a whisk. 

7

Add all of measured fragrance oil into the soap and stir thoroughly with a whisk. If the soap is still at a thin trace, pulse it with the stick blender using short bursts until it reaches a medium trace. This thicker texture will help the embed stay in place. 

8

Add 1/2 teaspoon of poppy seeds and stir in thoroughly using a whisk. 

9

Pour all of the soap into the mold, and tap the mold on the counter to help get rid of bubbles.

10

Insert the green melt and pour embed into the soap. We inserted it at a slight angle so that the stem would be in a different part of each bar when cut. 

11

Use a spoon to give the soap texture and make sure the top of the embed is covered. 

12

Place chrysanthemum flowers on top of the embed until it's completely covered. Continue to place flowers into the soap until you're happy with the look. 

13

Spritz the top of the soap with 99% isopropyl alcohol to prevent soda ash. Leave the soap uncovered - you don't want it to get too hot because the embed can melt. If you live in a very hot climate, place the soap in the fridge or freezer for 4-6 hours to prevent gel phase. 

14

Allow the soap to stay in the mold for about 2-3 days. Remove from the silicone mold, and allow the bars to cure for 4-6 weeks. Enjoy!

Tutorial credits

Photographer: Amanda Kerzman, Christina Becker