CBD and Hemp Face Oil Project
This recipe feels amazing. It's made with luxurious and skin-loving ingredients like hemp seed oil, borage oil, and squalane oil. The result is a product full of fatty acids, antioxidants, and vitamins E and A.
Hemp seed oil does have a nutty scent - we added a dash of lavender 40/42 essential oil to combat the smell, but you can skip that step if you like. To use, apply the oil to clean skin and don't rinse. We recommend using it at night.
Click here to learn more about using CBD oil in your bath and beauty products. For this project, we used a full spectrum CBD oil from Ology Essentials. Be sure to select an oil-based product for this recipe, not one that's made with water or alcohol.
This recipe is for 1 ounce of face oil and it contains 100 mg of CBD. You can add more or less based on your preference and the concentration of your oil. If you don't have CBD or don't want to add it, just add more of the other skincare oils to make up the difference.
Check out our DIY skincare kits for more skincare ideas.
What You Need:
Recipe
INGREDIENTS:
- Natural Hemp Seed Oil - 1 lb
- Squalane Oil - 1 oz
- Borage Oil - 4 oz
- Sunflower Oil - 1 lb
- Lavender 40/42 Essential Oil - 1.75 oz
EQUIPMENT:
Instructions
You will need:
- 0.3 oz. Hemp Seed Oil
- 0.3 oz. Squalane Oil
- 0.2 oz. Borage Oil
- 0.2 oz. Sunflower Oil
- 4 mL CBD Oil (100 mg) *See note
- 1 mL Lavender 40/42 Essential Oil (optional)
Follow these steps:
1
In a small container, add 0.3 ounces of hemp seed oil, 0.3 ounces of squalane oil, 0.2 ounces of borage oil, and 0.2 ounces of sunflower oil. Mix together.
2
Add 4 mL of CBD oil and mix thoroughly.
3
Add 1 mL of lavender 40/42 essential oil. Mix thoroughly.
4
Carefully pour the oil into the container of your choice.
5
To use, shake and apply a few drops of the oil. Do not rinse. Recommended for use at night.
CBD and Hemp Face Oil Project
- LEVEL Beginner
- TIME 30 minutes
- YIELD 1 ounce of oil
Project Description
This recipe feels amazing. It's made with luxurious and skin-loving ingredients like hemp seed oil, borage oil, and squalane oil. The result is a product full of fatty acids, antioxidants, and vitamins E and A.
Hemp seed oil does have a nutty scent - we added a dash of lavender 40/42 essential oil to combat the smell, but you can skip that step if you like. To use, apply the oil to clean skin and don't rinse. We recommend using it at night.
Click here to learn more about using CBD oil in your bath and beauty products. For this project, we used a full spectrum CBD oil from Ology Essentials. Be sure to select an oil-based product for this recipe, not one that's made with water or alcohol.
This recipe is for 1 ounce of face oil and it contains 100 mg of CBD. You can add more or less based on your preference and the concentration of your oil. If you don't have CBD or don't want to add it, just add more of the other skincare oils to make up the difference.
Check out our DIY skincare kits for more skincare ideas.
You will need:
- 0.3 oz. Hemp Seed Oil
- 0.3 oz. Squalane Oil
- 0.2 oz. Borage Oil
- 0.2 oz. Sunflower Oil
- 4 mL CBD Oil (100 mg) *See note
- 1 mL Lavender 40/42 Essential Oil (optional)
Follow these steps:
1
In a small container, add 0.3 ounces of hemp seed oil, 0.3 ounces of squalane oil, 0.2 ounces of borage oil, and 0.2 ounces of sunflower oil. Mix together.
2
Add 4 mL of CBD oil and mix thoroughly.
3
Add 1 mL of lavender 40/42 essential oil. Mix thoroughly.
4
Carefully pour the oil into the container of your choice.
5
To use, shake and apply a few drops of the oil. Do not rinse. Recommended for use at night.