Pretty in Pink Soap Project
- Skill Level: Beginner
- Time: 30 minutes
- Yield: 5-6 bars of soap
Project Description
It couldn't be easier to make! It's a great project for first-time soap makers or for making with kids. Simply add a chunk of Electric Bubble Gum Color Block and Pink EcoGlitter to melted clear soap. Rose Quartz Fragrance Oil adds a citrus-y rose scent. Once the soap is poured into the mold and has cooled, it's ready to use!
You will need:
- 6 Cavity Heart Silicone Mold
- 16 oz. Clear Melt and Pour Soap Base
- 0.4 oz. Rose Quartz Fragrance Oil
- Electric Bubblegum Color Block
- Pink EcoGlitter
- 99% Isopropyl Alcohol in a Spray Bottle
Follow these steps:
1
Chop 16 ounces of Clear Melt and Pour Soap Base into small, uniform cubes. Place them into a heat-safe container and melt in the microwave using 30 second bursts.
2
Once completely melted, add 0.4 ounces of Rose Quartz Fragrance Oil to the clear soap. Stir in completely.
3
Add small shavings of the Electric Bugglegum Color Block to the melted base. Stir to incorporate the color. If necessary, reheat the soap slowly using 5-10 second bursts to help the Color Blocks melt. Add about 1/4 teaspoon of Pink EcoGlitter and stir to incorporate.
4
Pour into the mold cavities. fill about 3/4 full to make 6 bars, or to the very top of the mold to create 5 bars. Spritz the top with alcohol to get rid of bubbles. Allow the soap in the mold to fully cool and harden for 4-6 hours.
5
Remove each bar from the mold. Wrap each bar in plastic wrap to prevent glycerin dew. Enjoy!
Tutorial credits
Photographer: Amanda Kerzman
Pretty in Pink Soap Project
- Skill Level: Beginner
- Time: 30 minutes
- Yield: 5-6 bars of soap
Project Description
It couldn't be easier to make! It's a great project for first-time soap makers or for making with kids. Simply add a chunk of Electric Bubble Gum Color Block and Pink EcoGlitter to melted clear soap. Rose Quartz Fragrance Oil adds a citrus-y rose scent. Once the soap is poured into the mold and has cooled, it's ready to use!
You will need:
- 6 Cavity Heart Silicone Mold
- 16 oz. Clear Melt and Pour Soap Base
- 0.4 oz. Rose Quartz Fragrance Oil
- Electric Bubblegum Color Block
- Pink EcoGlitter
- 99% Isopropyl Alcohol in a Spray Bottle
Follow these steps:
1
Chop 16 ounces of Clear Melt and Pour Soap Base into small, uniform cubes. Place them into a heat-safe container and melt in the microwave using 30 second bursts.
2
Once completely melted, add 0.4 ounces of Rose Quartz Fragrance Oil to the clear soap. Stir in completely.
3
Add small shavings of the Electric Bugglegum Color Block to the melted base. Stir to incorporate the color. If necessary, reheat the soap slowly using 5-10 second bursts to help the Color Blocks melt. Add about 1/4 teaspoon of Pink EcoGlitter and stir to incorporate.
4
Pour into the mold cavities. fill about 3/4 full to make 6 bars, or to the very top of the mold to create 5 bars. Spritz the top with alcohol to get rid of bubbles. Allow the soap in the mold to fully cool and harden for 4-6 hours.
5
Remove each bar from the mold. Wrap each bar in plastic wrap to prevent glycerin dew. Enjoy!
Tutorial credits
Photographer: Amanda Kerzman
You will need:
- 6 Cavity Heart Silicone Mold
- 16 oz. Clear Melt and Pour Soap Base
- 0.4 oz. Rose Quartz Fragrance Oil
- Electric Bubblegum Color Block
- Pink EcoGlitter
- 99% Isopropyl Alcohol in a Spray Bottle
Follow these steps:
1
Chop 16 ounces of Clear Melt and Pour Soap Base into small, uniform cubes. Place them into a heat-safe container and melt in the microwave using 30 second bursts.
2
Once completely melted, add 0.4 ounces of Rose Quartz Fragrance Oil to the clear soap. Stir in completely.
3
Add small shavings of the Electric Bugglegum Color Block to the melted base. Stir to incorporate the color. If necessary, reheat the soap slowly using 5-10 second bursts to help the Color Blocks melt. Add about 1/4 teaspoon of Pink EcoGlitter and stir to incorporate.
4
Pour into the mold cavities. fill about 3/4 full to make 6 bars, or to the very top of the mold to create 5 bars. Spritz the top with alcohol to get rid of bubbles. Allow the soap in the mold to fully cool and harden for 4-6 hours.
5
Remove each bar from the mold. Wrap each bar in plastic wrap to prevent glycerin dew. Enjoy!
Tutorial credits
Photographer: Amanda Kerzman
