Cinnamon Cocoa Melt and Pour Soap

Product Actions

   Intermediate
50 ounces of soap

Cinnamon Cocoa Melt and Pour Soap

PS000044

This Cinnamon Cocoa Soap tutorial shows you how to create a brown and white design that’s topped with a bit of cocoa powder. It’s scented with new Cinnamon Cocoa Fragrance Oil, which is an irresistible mix of nutmeg, coffee, and vanilla.
VIEW SUPPLIES VIEW INSTRUCTIONS

Share your product photos with #BrambleOn

Additional Information

  • Description
  • Supplies
  • Instructions
  • Reviews
  • Q&A

Description

Melt and pour soap is a great option for crisp and clean layers. This Cinnamon Cocoa Soap tutorial shows you how to create a brown and white design that’s topped with a bit of cocoa powder. It’s scented with new Cinnamon Cocoa Fragrance Oil, which is an irresistible mix of nutmeg, coffee, and vanilla. Just tie a rustic ribbon around the bars and they’re ready to gift.

There are a few key tools and techniques to create even layers. The first is patience – it’s important to allow the soap to cool and harden enough to support the next layer. The next is paying attention to temperature – it’s crucial that the soap isn’t too hot when it’s poured or it may melt the layer below. The last is 99% Isopropyl Alcohol – it needs to be sprayed before each pour to help the layers adhere. We also like to spray it after pouring to get rid of bubbles.

Because of the bakery notes in the Cinnamon Cocoa Fragrance Oil, this soap will discolor without Vanilla Color Stabilizer. We added it to the white and brown soap to prevent bleeding in between the layers.

 

    Details

  • Skill Level: Intermediate
  • Time to Complete: 2 hours
  • Kit Yields: 50 ounces of soap

Supplies

5 Ingredients
3 Tools
1 Items From Home
For All 8 Items
For All 8 Items
5 Ingredients
5 Items
$25.09
We do our best to include just what you need to make your project, however due to available product sizes, you may have left overs.
SFIC White Melt And Pour Soap Base - 1 lb

SFIC White Melt And Pour Soap Base - 1 lb

size: 1 lb
Price: $3.55

$7.10
SFIC Honey Melt And Pour Soap Base - 1 lb

SFIC Honey Melt And Pour Soap Base - 1 lb

size: 1 lb
Price: $4.00

$8.00
Cinnamon Cocoa Fragrance Oil - 2 oz

Cinnamon Cocoa Fragrance Oil - 2 oz

size: 2 oz
Price: $6.39

$6.39
Vanilla Color Stabilizer - 1 oz

Vanilla Color Stabilizer - 1 oz

size: 1 oz
Price: $2.00

$2.00
Brown Oxide Color Block - 1 Block

Brown Oxide Color Block - 1 Block

variant-quantity-set: 1
Price: $1.60

$1.60
3 Tools
3 Items
$31.99
10 inch Silicone Loaf Mold

10 inch Silicone Loaf Mold

variant-quantity-set: 1
Price: $21.00

$21.00
99% Isopropyl Alcohol - 1 bottle (16 oz by volume)

99% Isopropyl Alcohol - 1 bottle (16 oz by volume)

size: 1 bottle
Price: $5.00

$5.00
Crinkle Cutter

Crinkle Cutter

Qty: 1
Price: $5.99

$5.99
OTHER ITEM'S YOU'LL NEED
Cocoa Powder

Instructions

  Print

Cinnamon Cocoa Melt & Pour Soap Project
This Cinnamon Cocoa Soap tutorial shows you how to create a brown and white design that’s topped with a bit of cocoa powder. It’s scented with new Cinnamon Cocoa Fragrance Oil, which is an irresistible mix of nutmeg, coffee, and vanilla.

Ingredients

10″ Silicone Loaf Mold

30 oz. White Melt and Pour Soap Base

20 oz. Honey Melt and Pour Soap Base

0.8 oz. Cinnamon Cocoa Fragrance Oil

0.8 oz. Vanilla Color Stabilizer

Brown Oxide Color Block

Cocoa Powder

99% Isopropyl Alcohol in a Spray Bottle

Optional: Crinkle Cutter

Instructions

1

Chop 30 ounces of White Melt and Pour Soap Base into small uniform pieces. Place the soap into a heat-safe container. Chop 20 ounces of Honey Melt and Pour Soap Base and place into a separate heat-safe container.

chopped melt & pour soap

2

Place the container of white soap into the microwave and melt using 30-60 second bursts. Add 0.4 ounces of Cinnamon Cocoa Fragrance Oil and 0.4 ounces of Vanilla Color Stabilizer. Use a spoon to thoroughly mix in.

add fragrance to white soap batter

adding vanilla color stabilizer

3

To make each layer exactly the same size, place the mold on a scale and pour 10 ounces of white soap into the mold. Spritz the soap with 99% isopropyl alcohol to get rid of bubbles. Allow the layer to harden and cool for about 20-30 minutes so it can support the next layer.

pour layer of white into mold

4

Once the white layer has cooled and hardened, melt the 20 ounces of Honey Melt and Pour Soap Base in the microwave using 30-60 second bursts. Add chunks of the Brown Oxide Color Block to the melted soap and stir until you have a rich brown color.

add brown oxide

5

Add 0.4 ounces of Cinnamon Cocoa Fragrance Oil and 0.4 ounces of Vanilla Color Stabilizer. Stir in thoroughly. Allow the soap to cool to 125-130° F so it doesn’t melt the soap below.
NOTE: While this soap is already brown, the Vanilla Color Stabilizer prevents the vanilla discoloration from bleeding into the white layers. 

add fragrance to brown batter

6

Spritz the white layer with 99% isopropyl alcohol and place the mold onto a scale. Pour 10 ounces of the brown soap into the mold and spritz with alcohol to get rid of bubbles. Allow the soap to cool for 20-30 minutes.

brown batter into mold

7

Remelt the white soap using 20-30 second bursts and allow it to cool to 125-130° F. Spritz the bottom layer with 99% isopropyl alcohol and pour 10 ounces of white soap into the mold. Spritz the soap with alcohol to get rid of bubbles. Allow this layer to cool and harden for 20-30 minutes.

layer white soap batter

8

Remelt the remaining brown soap using 10-20 second bursts and allow it to cool to about 125-130° F. Spritz the soap in the mold with 99% isopropyl alcohol and pour the remaining brown soap into the mold. Spritz with alcohol to get rid of bubbles and allow it to cool and harden for 20-30 minutes.

layer brown soap batter

9  

Remelt the remaining white soap using 10-20 second bursts and allow it to cool to about 125-130° F. Spritz the soap in the mold with 99% isopropyl alcohol and pour the remaining white soap into the mold. Spritz with alcohol to get rid of bubbles.

last layer of white soap

10  

Place a small amount of cocoa powder into a sifter – we used the Powder Duster. Gently tap the sifter to dust the top of the soap with cocoa powder. Once you’re happy with the look, allow the soap to fully cool and harden for about 4 hours or overnight.

dust with cocoa powder

11  

Remove the soap from the mold. Cut the soap into bars with either a non-serrated knife or a crinkle cutter. Which you use just depends on what look you prefer. The non-serrated knife shows off crisp layers, while the crinkle cutter gives extra detail. To prevent glycerin dew, wrap the soap in plastic wrap. Enjoy!

final project image

Tutorial credits

Photographer: Amanda Kerzman

Reviews

Q&A

SHARE YOUR EXPERIENCE

Email this project to your friends.

Let us know how it went by leaving a review, asking a question, or uploading your project photos.